Abstract:Manganese oxide with high theoretical specific capacity and intermediate reaction plateau is a promising anode candidate for lithium-ion hybrid capacitors (LIHCs). However, the sluggish kinetics and severe volume expansion have seriously hindered its practical progress. Herein, a mixed-valence manganese oxide confined by a dual-carbon skeleton network (MnOx@C-R) was successfully prepared. Owing to the synergistic effect of the introduction of the dual-carbon skeleton-network structure in a reducing atmosphere, the reasonable pore size distribution, crystallinity, and phase composition have been optimized. The material exhibits excellent lithium storage performance (778.2 mA h g–1 after 10 cycles at 0.1 A g–1), along with excellent rate performance (141.7 mA h g–1 at 5 A g–1) and stable cycling ability (402.4 m Ah g–1 for 1000 cycles at 1 A g–1). Moreover, further characterization displayed the change of the valence state of manganese during the charging/discharging, revealing the source of the excellent electrochemical performance of MnOx@C-R. Therefore, LIHCs were assembled using a MnOx@C-R anode and the activated carbon network with excellent energy density (151 Wh kg–1) and amazing power density (21.9 kW kg–1). This work supplies an alternative strategy for optimizing the lithium storage performance of manganese oxide.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02116.Raman spectra of MnOx@C and MnOx@C-R; TG and DTG of MnOx@C-R; C 1s, O 1s, and N 1s XPS spectra of MnOx@C-R and MnOx@C; SEM images of MnOx; SEM images of MnOx@C; the DFT pore size distribution of MnOx@C-R and MnOx@C; microstructure analysis of MnOx@C; capacity contribution of different voltage ranges of MnOx@C-R; CV curves of MnOx and MnOx@C at 0.1 mV s–1; GCD curves of the first three cycles of MnOx and MnOx@C at 0.1 A g–1; cycling performance of MnOx-R; values of b plotted, and percentage of capacitance contribution at different scanning rates; electrochemical reaction mechanism at different voltage intervals; GITT test; EX-XPS spectra of powder samples and discharging/charging: full spectra and high-resolution O 1s; Nyquist plots of MnOx@C-R and MnOx@C; SEM images of GLC and AGLC; N2 adsorption–desorption isotherms of GLC and AGLC; electrochemical performance of AGLC cathode; GCD curves of LIHCs at different mass ratios of LIHCs; BET parameters of MnOx@C and MnOx@C-R; capacity and ratio of different voltage ranges of MnOx@C-R and MnOx@C; different voltage capacitive behavior at different scan rates; BET parameters of the AGLC and GLC (PDF)This article has not yet been cited by other publications.

Porous carbon matrix-encapsulated MnO in situ derived from metal-organic frameworks as advanced anode materials for Li-ion capacitors

Metal-organic frameworks (MOFs)-derived Mn 2 SnO 4 @C anode based on dual lithium storage mechanism for high-performance lithium-ion capacitors

MOF-derived ultrafine MnO nanocrystals embedded in a porous carbon matrix as high-performance anodes for lithium-ion batteries

Zn/Co Bimetallic Metal-Organic Framework Derived Carbon Anode with Enchanted Rate Capability for Lithium-Ion Capacitors

Metal–Organic Framework (MOF) Derived Electrodes with Robust and Fast Lithium Storage for Li‐Ion Hybrid Capacitors

MOF-derived MnO/C composites as high-performance lithium-ion battery anodes

Nano-Spheroidal MnOx/C Nanomaterial with Battery-Like and Capacitive Charge Storage for Lithium-Ion Capacitors

One-pot synthesis of nanosized MnO incorporated into N-doped carbon nanosheets for high performance lithium storage

Embedding MnO@Mn 3 O 4 Nanoparticles in an N-Doped-Carbon Framework Derived from Mn-Organic Clusters for Efficient Lithium Storage.

Metal-Organic Framework Derived MnO/Carbon Cloth Loaded by MnO Nanoparticles as a High-Performance Self-Supporting Anode for Lithium-Ion Batteries

Rational design of 3D net-like carbon-based Mn3O4 anode material with an enhanced lithium storage performance

MOF-derived porous graphitic carbon with optimized plateau capacity and rate capability for high performance lithium-ion capacitors

An instantaneous metal organic framework to prepare ultra-high pore volume porous carbon for lithium ion capacitors

Reduced graphene oxide encapsulated MnO microspheres as an anode for high-rate lithium ion capacitors

Peapod-like MnO@Hollow carbon nanofibers film as self-standing electrode for Li-Ion capacitors with enhanced rate capacity

Construction of N–doped carbon encapsulated Mn2O3/MnO heterojunction for enhanced lithium storage performance

A homologous N/P-codoped carbon strategy to streamline nanostructured MnO/C and carbon toward boosted lithium-ion capacitors

In-situ synthesis and lithium storage properties of MnF 2 and MnO inserted hard carbon from conjugated microporous polymer

2D Graphene/MnO Heterostructure with Strongly Stable Interface Enabling High‐Performance Flexible Solid‐state Lithium‐Ion Capacitors

Multidimensional Dual-Carbon Skeleton Network Confined MnO x Anode Boosting High-Performance Lithium-Ion Hybrid Capacitors

Nitrogen-Enriched Porous Carbon Coating for Manganese Oxide Nanostructures Toward High-Performance Lithium-Ion Batteries.