Abstract:Manganese oxide with high theoretical specific capacity and intermediate reaction plateau is a promising anode candidate for lithium-ion hybrid capacitors (LIHCs). However, the sluggish kinetics and severe volume expansion have seriously hindered its practical progress. Herein, a mixed-valence manganese oxide confined by a dual-carbon skeleton network (MnOx@C-R) was successfully prepared. Owing to the synergistic effect of the introduction of the dual-carbon skeleton-network structure in a reducing atmosphere, the reasonable pore size distribution, crystallinity, and phase composition have been optimized. The material exhibits excellent lithium storage performance (778.2 mA h g–1 after 10 cycles at 0.1 A g–1), along with excellent rate performance (141.7 mA h g–1 at 5 A g–1) and stable cycling ability (402.4 m Ah g–1 for 1000 cycles at 1 A g–1). Moreover, further characterization displayed the change of the valence state of manganese during the charging/discharging, revealing the source of the excellent electrochemical performance of MnOx@C-R. Therefore, LIHCs were assembled using a MnOx@C-R anode and the activated carbon network with excellent energy density (151 Wh kg–1) and amazing power density (21.9 kW kg–1). This work supplies an alternative strategy for optimizing the lithium storage performance of manganese oxide.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02116.Raman spectra of MnOx@C and MnOx@C-R; TG and DTG of MnOx@C-R; C 1s, O 1s, and N 1s XPS spectra of MnOx@C-R and MnOx@C; SEM images of MnOx; SEM images of MnOx@C; the DFT pore size distribution of MnOx@C-R and MnOx@C; microstructure analysis of MnOx@C; capacity contribution of different voltage ranges of MnOx@C-R; CV curves of MnOx and MnOx@C at 0.1 mV s–1; GCD curves of the first three cycles of MnOx and MnOx@C at 0.1 A g–1; cycling performance of MnOx-R; values of b plotted, and percentage of capacitance contribution at different scanning rates; electrochemical reaction mechanism at different voltage intervals; GITT test; EX-XPS spectra of powder samples and discharging/charging: full spectra and high-resolution O 1s; Nyquist plots of MnOx@C-R and MnOx@C; SEM images of GLC and AGLC; N2 adsorption–desorption isotherms of GLC and AGLC; electrochemical performance of AGLC cathode; GCD curves of LIHCs at different mass ratios of LIHCs; BET parameters of MnOx@C and MnOx@C-R; capacity and ratio of different voltage ranges of MnOx@C-R and MnOx@C; different voltage capacitive behavior at different scan rates; BET parameters of the AGLC and GLC (PDF)This article has not yet been cited by other publications.

Nano-Spheroidal MnOx/C Nanomaterial with Battery-Like and Capacitive Charge Storage for Lithium-Ion Capacitors

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Metal-organic frameworks (MOFs)-derived Mn 2 SnO 4 @C anode based on dual lithium storage mechanism for high-performance lithium-ion capacitors

A Superior Lithium-Ion Capacitor Based on Ultrafine MnO/Dual N-Doped Carbon Anode and Porous Carbon Cathode

Peapod-like MnO@Hollow carbon nanofibers film as self-standing electrode for Li-Ion capacitors with enhanced rate capacity

Elevating the Comprehensive Performance of Carbon-Based Hybrid Electrode Materials by Incorporating Nickel Silicate for Lithium-Ion Capacitors

A homologous N/P-codoped carbon strategy to streamline nanostructured MnO/C and carbon toward boosted lithium-ion capacitors

Zn/Co Bimetallic Metal-Organic Framework Derived Carbon Anode with Enchanted Rate Capability for Lithium-Ion Capacitors

Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors

Co3O4 porous nanorod/N-doped reduced graphene oxide composite with fast pseudocapacitive lithium storage for high-performance lithium-ion capacitors

MnCO3 Cuboids from Spent LIBs: A New Age Displacement Anode to Build High-Performance Li-Ion Capacitors

γ-Mo 2 N Nanobelts with Controlled Grain and Mesopore Sizes as High-Performance Anodes for Lithium-Ion Capacitors

TiO2 nanotubes supported ultrafine MnCo2O4 nanoparticles as a superior-performance anode for lithium-ion capacitors

Molybdenum dioxide supported carbon nanotubes@carbon constructs disordered nanocluster particles as anodes for lithium-ion capacitors with long-term cycling stability

Multidimensional Dual-Carbon Skeleton Network Confined MnO x Anode Boosting High-Performance Lithium-Ion Hybrid Capacitors

Designing in-situ carbon-coated mixed phase Iron Oxides anode coupled with a heteroatom doped porous carbon cathode for Lithium-ion capacitors

Oxygen Vacancy Modulation of Bimetallic Oxynitride Anodes toward Advanced Li‐Ion Capacitors

Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Iron oxide encapsulated in nitrogen-rich carbon enabling high-performance lithium-ion capacitor

Porous carbon matrix-encapsulated MnO in situ derived from metal-organic frameworks as advanced anode materials for Li-ion capacitors

SnO2/SnS2 heterostructure@ MXene framework as high performance anodes for hybrid lithium-ion capacitors