Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Analytically measure the vibratory characteristics of the cable-stayed bridge during dual-cantilever erection

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

Estimation of damping matrices of cable-stayed bridges based on known data of modal damping

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Measuring Methods of Cable Tension in Cable-Stayed Bridges

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Modeling and Analysis of the In-Plane Vibration of a Complex Cable-Stayed Bridge

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

COMPARATIVE ANALYSIS OF MEASURING METHODS OF CABLE TENSION FORCES IN CABLE-STAYED BRIDGES

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Nonlinear Analysis of Cable Vibration of a Multispan Cable-Stayed Bridge under Transverse Excitation

Parametric Oscillation Of Cables In Cable-Stayed Bridges Under Deck-Motion Excitations

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

An Approximate Algorithm for Calculating Longitudinal Fundamental Frequency of Middle Pylon Constrained by Cables in Multi-Pylon Suspension Bridge

Dynamic modeling and analysis on planar free vibration of long-span arch bridges during construction

Evaluation of Cable Tension Forces Using Vibration Method for a Cable-stayed Bridge under Construction

Analysis of Dynamic Behavior of Catwalks of Long-span Suspension Bridge Without Wind-resistant Cable