Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

HIGH INTENSITY NEUTRINO SOURCE SUPERCONDUCTING SOLENOID CRYOSTAT DESIGN

High Temperature Superconducting Magnets for Efficient Low Energy Beam Transport Systems

Design and Test of an 8T Focusing Superconducting Solenoid of FRIB Driver Linac

Superconducting Feeder System For Iter Central Solenoid Module Final Test Facility

Cryogenic and safety design of the future high field cable test facility at Fermilab

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

High duty factor plasma generator for CERN's Superconducting Proton Linac

A High-Intensity H- Linac at CERN Based on LEP-2 Cavities

A 300 kA Pulsed Power Supply for LBNF

Advances of the FRIB Project

STATUS OF THE SUPERCONDUCTING PROTON LINAC (SPL) CRYO- MODULE

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Superconducting Magnet Development for the HIAF Accelerator Complex

DESIGN OF A NEW HORIZONTAL TEST CRYOSTAT FOR SCRF CAVITIES AT THE UPPSALA UNIVERSITY

Design of a CW linac for the Compact Intense Fast NEutron Facility

A Helical Cooling Channel System for Muon Colliders

STUDY ON A LOW BETA HIGH CURRENT TAPER TYPE SUPERCONDUCTING HALF WAVE RESONATOR FOR BISOL*

Proposal and design of 81.25 MHz heavy ion drift tube linacs for BISOL

An Advanced NCRF Linac Concept for a High Energy e$^+$e$^-$ Linear Collider

Magnet Design for the High-Intensity Muon Beams Project (HIMB) at PSI's Accelerator Complex HIPA