Abstract:The objective of this study was to develop a methodology for quantifying the influence of geogrid on the performance of flexible pavement structures in a manner that would allow incorporation into Pavement Mechanistic-Empirical (ME) Design. The finite element technique was used to develop the geogrid-reinforced flexible pavement structure models, which focused on the characterization of the lateral confinement and vertical membrane effect of geogrid. A full-scale Soil Tank test was conducted to assess the validity of the developed geogrid-reinforced models by comparing the model predicted pavement responses (i.e., surface deflections, tensile strain at the bottom of asphalt concrete, and vertical stress distributions) to those tank test measurements. In general, the developed finite element models were capable of accurately predicting the responses of geogrid-reinforced and unreinforced pavement structures. It was found that the placement of geogrid increases the stiffness of base course and significantly reduces the vertical stresses around the geogrid layer, but cannot effectively reduce the tensile strain at the bottom of asphalt concrete. This indicated that the geogrid reinforcement is beneficial for reducing the rutting damage in base course and subgrade, but not effective in prolonging the fatigue life of flexible pavement. To quantify the influence of geogrid, the geogrid-reinforced flexible pavement structure was equivalent to an unreinforced flexible pavement structure with the modified material properties, which was based on a pavement response equivalency approach. The determined modified material properties was then input into Pavement ME Design software to predict the performance of geogrid-reinforced flexible pavement structures. Two case studies were conducted to predict the performance of two geogrid-reinforced pavement sections that were identified from the Long-Term Pavement Performance (LTPP) database. The predicted performance results (i.e., rutting depth and fatigue cracking area) were coincident with those field measurements, which validated the prediction accuracy of the proposed approach.

Calculation of Pavement Engineering Quantities of Mountainous Highway in Feasibility Study Stage

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Feasibility Study Stage of Mountain Highway Engineering Based on Empirical Analysis Method Estimation of Subgrade Engineering Quantity

Calculation of Vehicular Load-Induced Plastic Deformation of Soft Subsoil

Study of the Slope Prevent in the High-Level Road in the Mountainous Area

Broaden Scheme and Optimization Design of High Slope Under Highway Operating Condition

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Reasonable Thickness Design of Expressway Pavement Structures Based on Gray Relation Analysis of Subgrade Soil Improvement

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Predicting Postconstruction Settlements Generated by Moving Traffic on Highways Built on Soft Soil in China Using Mechanistic-Empirical Design Method

A Combined Method to Predict the Long-Term Settlements of Roads on Soft Soil under Cyclic Traffic Loadings

Pavement Structure Optimization Analysis of Basalt Fiber High Modulus Asphalt Mixture

Analysis on Control Indicators for Settlement and Deformation of the Rock-Filled Subgrade in Mountainous Area

Research on Nonlinear Contact Condition Characteristic of Bitumen Pavement

Driving Safety Evaluation and Early Warning of Mountain Highway Based on Vehicle-Pavement Coupling Model

Thickness ranges calculation method of double asphalt overlay on concrete pavement

Research on Mechanical Response of Pavement Structure to Differential Settlement of Subgrade on Highway Widening

Pavement Mechanics Calculation Based on the Analytical Solution of Layered Viscoelastic System under Horizontal and Vertical Loads

Method for Verifying the Reasonableness of Pavement Surface Drainage Design

Evaluation of the Coordination of Structural Layers in the Design of Asphalt Pavement

Application of Semi-Analytical Finite Element Method to Evaluate Asphalt Pavement Bearing Capacity