Abstract:This paper reports a study into the features of the structural-phase composition of products from the carbon-thermal reduction of scale of high-speed steels that yields an alloying additive. This is necessary to determine the technological parameters that reduce the loss of target elements in the process of obtaining and using resource-saving alloying material. The study indicates that when the degree of scale reduction changed from 28 % to 67 % and 81 %, an increase in the manifestation of a solid solution of carbon and alloying elements in the α-Fe lattice was observed. At the same time, the intensity of the diffraction maxima of FeO and Fe3O4 decreased. In the reduced products, the presence of Fe3C, FeW3C, Fe3W3C, and WC was traced. With an increase in the degree of scale reduction from 28 % to 67 %, the disordered (of "loose" appearance) microstructure was replaced with the formed particles of round and multifaceted shape with different content of alloying elements. At the reduction stage of 81 %, the microstructure had a finely fibrous structure. Based on the suite of studies, the most acceptable degree of reduction of scale of high-speed steel, followed by the use of the obtained material as an alloying additive, is 81 %. At the same time, ensuring the degree of recovery at the level of 67 % would also suffice. This is due to the fact that residual carbon in the form of carbides provides an increased reducing ability and degree of assimilation of alloying elements with the restoration of the residual oxide component in the liquid metal during doping. Spongy microstructure contributes to faster dissolution, in relation to the corresponding standard ferroalloys. This ensures a reduction in the total smelting time and, as a result, a decrease in the energy consumed

Metal Recovery from Stainless Steel Mill Scale by Microwave Heating

Improving Zinc Recovery from Steelmaking Dust by Switching from Conventional Heating to Microwave Heating

Production of cleaner mill scale by dynamic separation of the mill scale from the fast-moving flume water at a hot rolling mill

Investigation into Recycling of Iron Oxide Scale on H13 Steel by Low‐Temperature Carbothermal Reduction Method

Green and efficient utilization of stainless steel dust by direct reduction and self-pulverization

Innovative Transformation and Valorisation of Red Mill Scale Waste into Ferroalloys: Carbothermic Reduction in the Presence of Alumina

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Separation of Mill Scale from Flume Wastewater Using a Dynamic Separator Toward Zero Wastes in the Steel Hot-Rolling Process

Reduction of Oxide Scale with Hydrogen

New Approach to the Utilization of Microwave Thermal Energy: Desulfurization and Decarburization of Spent Catalyst Via Microwave Treatment

Identifying features in the structural and phase composition of the products of recycling of the scale of high-speed cutting steel by carbon thermal reduction

Metal Droplet Migration and Gathering in Semi-molten Sludge at Low Temperature Reduction

Application of Microwave Melting for the Recovery of Tin Powder

Vacuum Carbon Reducing Iron Oxide Scale to Prepare Porous 316 Stainless Steel

Recovery of Zinc and Iron from Steel Mill Dust—An Overview of Available Technologies

Study on Slag-Metal Separation Behavior of Chromite by Silicothermic Reduction

Efficient extraction of refractory Cr from stainless steel dust by sodium persulfate oxidation roasting

Mill Scale of Hot-Rolled Rebars

Manganese and Aluminium Recovery from Ferromanganese Slag and Al White Dross by a High Temperature Smelting-Reduction Process

Recent developments on the removal of zinc from electric arc furnace dust by using microwave heating