Abstract:The importance of amorphous and nanocrystalline Fe-based soft magnetic materials is increasing annually. Thus, characterisation of the chemical compositions, alloying additives, and crystal structures is significant for obtaining the appropriate functional properties. The purpose of this work is to present comparative studies on the influence of Nb (1, 2, 3 at.%) and Mo (1, 2, 3 at.%) in Fe substitution on the thermal stability, crystal structure, and magnetic properties of a rapidly quenched Fe79.4Co5Cu0.6B15 alloy. Additional heat treatments in a vacuum (260-640 °C) were performed for all samples based on the crystallisation kinetics. Substantial improvement in thermal stability was achieved with increasing Nb substitution, while this effect was less noticeable for Mo-containing alloys. The heat treatment optimisation process showed that the least lossy states (with a minimum value of coercivity below 10 A/m and high saturation induction up to 1.7 T) were the intermediate state of the relaxed amorphous state and the nanocomposite state of nanocrystals immersed in the amorphous matrix obtained by annealing in the temperature range of 340-360 °C for 20 min. Only for the alloy with the highest thermal stability (Nb = 3%), the α-Fe(Co) nanograin grows, without the co-participation of the hard magnetic Fe3B, in a relatively wide range of annealing temperatures up to 460 °C, where the second local minimum in coercivity and core power losses exists. For the remaining annealed alloys, due to lower thermal stability than the Nb = 3% alloy, the Fe3B phase starts to crystallise at lower annealing temperatures, making an essential contribution to magneto-crystalline anisotropy, thus the substantial increase in coercivity and induction saturation. The air-annealing process tested on the studied alloys for optimal annealing conditions has potential use for this type of material. Additionally, optimally annealed Mo-containing alloys are less lossy materials than Nb-containing alloys in a frequency range up to 400 kHz and magnetic induction up to 0.8 T.

Long-term stability of soft magnetic properties of amorphous and nanocrystalline alloys based on iron

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Effects of Ambient Gasses on the Magnetic Properties of Fe84.8Zr3.4Nb3.4B7.4Cu1 Nanocrystalline Alloy

Magnetic properties evolution and crystallization behaviour of vacuum- and air-long-term-annealed rapidly quenched Fe80.3Co5Cu0.7B14 alloy

Thermal stability and magnetic properties of the nanocrystalline (Fe64Co21B15)99Cu1 high-Bs alloy at elevated temperatures

Magnetic Properties of Amorphous Nanocrystalline Alloys Based on Iron with Different Contents of Nobium in Structural Relaxation Processes

Effect of annealing temperature on magnetic properties and corrosion resistance of Fe75.8Si12B8Nb2.6Cu0.6P1 alloy

Influence of Annealing Temperature on Microstructure and Magnetic Properties of FeSiNbCuBP Amorphous Alloys

Influence of Nb and Mo Substitution on the Structure and Magnetic Properties of a Rapidly Quenched Fe79.4Co5Cu0.6B15 Alloy

Tailoring the thermal stability and soft magnetic properties of Fe80-Ni Si7B8P4Cu1 amorphous nanocrystalline alloys based on the magnetic domain structure

Exploring Microstructure and Magnetic Domain Evolution in the As-cast Soft Magnetic Fe74B20Nb2Hf2Si2 Alloy: A Comprehensive Study Using STEM, Lorentz TEM, and LM-STEM DPC Microscopy

Magnetic properties of the composition of nanocrystals and amorphous matrix in an alloy of the Fe-Nb-Si-B-Cu system

High performance Fe-based nanocrystalline alloys with excellent thermal stability

The Effects of Magnetic Field Annealing on the Magnetic Properties and Microstructure of Fe 80 Si 9 B 11 Amorphous Alloys

Rapid Annealing Optimizing Magnetic Softness and Thermal Stability of Mn-Substituted Fe-Based Nanocrystalline Alloys

Effect of annealing in unsaturated magnetic field on the magnetic properties of an amorphous alloy Fe77Ni1Si9B13

Effects of Annealing on the Microstructure and Magnetic Property of the Mechanically Alloyed FeSiBAlNiM (m=co, Cu, Ag) Amorphous High Entropy Alloys

Effect of annealing temperature on structure and high-temperature soft magnetic properties of (Fe0.9Co0.1)72.7Al0.8Si13.5Cu1Nb3B8V1 nanocrystalline alloy

Magnetic field annealing of FeCo-based amorphous alloys to enhance thermal stability and Curie temperature

The Effect of Annealing on the Soft Magnetic Properties and Microstructure of Fe82Si2B13P1C3 Amorphous Iron Cores

Dependence of the Magnetic Stability of Temperature on Annealing Temperature for Nanocrys-Talline Soft Magnetic Material