Abstract:This study focuses on the development of a piezoelectric device capable of generating feedback vibrations to the user who manipulates it. The objective here is to explore the possibility of developing a haptic system that can replace physical buttons on the tactile screen of in-car systems. The interaction between the user and the developed device allows completing the feedback loop, where the user's action generates an input signal that is translated and outputted by the device, and then detected and interpreted by the user's haptic sensors and brain. An FEM (finite element model) via ANSYS multiphysics software was implemented to optimize the haptic performance of the wafer structure consisting of a BaTiO3 multilayered piezocomposite coated on a PET transparent flexible substrate. Several parameters relating to the geometric and mechanical properties of the wafer, together with those of the electrodes, are demonstrated to have significant impact on the actuation ability of the haptic device. To achieve the desired vibration effect on the human skin, the haptic system must be able to drive displacement beyond the detection threshold (~2 µm) at a frequency range of 100-700 Hz. The most optimized actuation ability is obtained when the ratio of the dimension (radius and thickness) between the piezoelectric coating and the substrate layer is equal to ~0.6. Regarding the simulation results, it is revealed that the presence of the conductive electrodes provokes a decrease in the displacement by approximately 25-30%, as the wafer structure becomes stiffer. To ensure the minimum displacement generated by the haptic device above 2 µm, the piezoelectric coating is screen-printed by two stacked layers, electrically connected in parallel. This architecture is expected to boost the displacement amplitude under the same electric field (denoted E) subjected to the single-layered coating. Accordingly, multilayered design seems to be a good alternative to enhance the haptic performance while keeping moderate values of E so as to prevent any undesired electrical breakdown of the coating. Practical characterizations confirmed that E=20 V/μm is sufficient to generate feedback vibrations (under a maximum input load of 5 N) perceived by the fingertip. This result confirms the reliability of the proposed haptic device, despite discrepancies between the predicted theory and the real measurements. Lastly, a demonstrator comprising piezoelectric buttons together with electronic command and conditioning circuits are successfully developed, offering an efficient way to create multiple sensations for the user. On the basis of empirical data acquired from several trials conducted on 20 subjects, statistical analyses together with relevant numerical indicators were implemented to better assess the performance of the developed haptic device.

Tactile Touch Plate with Variable Boundary Conditions

Flexible Tactile Sensor Array for Slippage and Grooved Surface Recognition in Sliding Movement

Confinement of Vibrotactile Stimuli in Periodically Supported Plates

Three-Dimensional Finite Element Analysis of a Novel Silicon Based Tactile Sensor with Elastic Cover.

A Novel Silicon Based Tactile Sensor with Fluid Encapsulated in the Cover Layer for Prosthetic Hand

Method for Recognizing Pressing Position and Shear Force Using Active Acoustic Sensing on Gel Plates

A Mechatronic Platform for Studies of Tactile Sensory System on Prosthesis Hand

Touch Sensors with Overlapping Signals: Concept Investigation on Planar Sensors with Resistive or Optical Transduction

A Virtual 2D Tactile Array for Soft Actuators Using Acoustic Sensing

Kirigami Design of Flexible and Conformal Tactile Sensor on Sphere‐shaped Surface for Contact Force Sensing

Embedded real-time ultrasound-based multi-touch system

High Resolution Tactile Sensors for Curved Robotic Fingertips

Haptic Feedback Device Using 3D-Printed Flexible, Multilayered Piezoelectric Coating for In-Car Touchscreen Interface

Impact Localization Combined with Haptic Feedback for Touch Panel Applications Based on the Time-Reversal Approach.

Acoustic impact localization in plates: properties and stability to temperature variation

Proposal of a Real-Time Test Platform for Tactile Internet Systems

Perception of Surface Defects by Active Exploration with a Biomimetic Tactile Sensor

Multichannel Vibrotactile Glove: Validation of a new device designed to sense vibrations

Dynamic Shaping of Multi-Touch Stimuli by Programmable Acoustic Metamaterial

Acoustic Soft Tactile Skin (AST Skin)

Surface haptic rendering of virtual shapes through change in surface temperature