Abstract:In this work, a novel sol-gel coating of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS)-silica was prepared for capillary microextraction (CME) of trace Cu, Zn, Ni, Hg and Cd followed by on-line ICP-MS detection. This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing tetramethoxysilane (TMOS) as a precursor, AAPTS as a co-precursor, ethanol as the solvent and cetyltrimethylammonium bromide (CTAB) as the template. The structure of the capillary coating was characterized by IR, SEM and TEM. Various experimental parameters affecting capillary microextraction of the target analytes have been investigated carefully, and the optimized extraction conditions were established. It was found that the AAPTS-silica coating with a terminal functional group of -NH-CH2-CH2-NH2 exhibited a high selectivity towards the selected metal ions. With a consumption of 1.0 mL sample solution and 80 microL eluent, the detection limits (3sigma) were found to be 1.8, 11.8, 1.1, 3.3 and 1.4 pg mL(-1) for Cu, Zn, Ni, Hg and Cd, respectively. A sampling frequency of 14 h(-1) and an enrichment factor of 12.5 were obtained under the optimized experimental conditions. The relative standard deviations (RSDs) for the target analytes were less than 3.6% (C = 1 ng mL(-1), n = 7, sample volume = 1 mL). Two certified reference materials of NIES No.10-c rice flour and BCR-CRM 278 mussel flesh were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The developed method had also been applied to the determination of trace target elements in human hair, serum and urine, and the recoveries for the spiked samples were in the range of 89.2-101.8%. The AAPTS-silica coated capillary showed an excellent pH resistance and could be used for more than 120 times without decreasing adsorption efficiency.

β-Cyclodextrin-Cross-Linked Polymer as Solid Phase Extraction Material Coupled Graphite Furnace Atomic Absorption Spectrometry for Separation/Analysis of Trace Copper

A novel fast room-temperature cloud point extraction coupled to graphite furnace atomic absorption spectroscopy for Copper(II) traces determination

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Nickel hydroxide nanoflower–based dispersive solid-phase extraction of copper from water matrix

Poly(2-Amino-4-Thiazoleacetic Acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for the Electrochemical Detection of Copper(Ii)

Covalent Organic Framework-Lzu1@pei@fe3o4-based Magnetic Dispersive Micro-Solid Phase Extraction of Tetracyclines from Environmental Water Prior to HPLC Analysis.

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Carbon/Alginate/Chitosan Composite as a Sorbent for Solid-Phase Extraction and Preconcentration of Cu(II)

Selective determination of cuprous ion in copper dissolving solution based on bathocuproine-modified expanded graphite electrode

Development a novel supramolecular solvent microextraction procedure for copper in environmental samples and its determination by microsampling flame atomic absorption spectrometry

PRECONCENTRATION OF TRACE COPPER IN WATER SAMPLES WITH FI-SOLVENT EXTRACTION AND AAS

Non-ceruloplasmin-bound copper and copper speciation in serum with extraction using functionalized dendritic silica spheres followed by ICP-MS detection

Development of a new electrochemical method for the determination of copper(ii) at trace levels in environmental and food samples

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection

In-situ preparation of β-cyclodextrin-crosslinked polymer coated glass fiber for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

Synthesis and application of cerium oxide nanoparticles for preconcentration of trace levels of copper in water and foods followed by flame atomic absorption spectrometry

β-Cyclodextrin epichlorohydrin copolymer as a solid-phase extraction adsorbent for aromatic compounds in water samples

Attached β-cyclodextrin/γ-(2,3-epoxypropoxy) propyl trimethoxysilane to graphene oxide and its application in copper removal

Titanium Dioxide Nanotubes as Solid-Phase Extraction Adsorbent for the Determination of Copper in Natural Water Samples

Copper Determination by Flow Injection On-Line Sorbent Preconcentration Coupled with Flame Atomic Absorption Spectrometry Using 1,10 Phenanthroline

Determination of trace labile copper in environmental waters by magnetic nanoparticle solid phase extraction and high-performance chelation ion chromatography