Abstract:The off-axis embedment behaviors of unidirectional and multidirectional laminated engineered bamboo panels used for glued-laminated bamboo (glubam) structures under dowel-type bolts with three different diameters, 12, 14, and 16 mm, were experimentally studied in this research. The half-hole loading method given by current standards was adopted to perform the embedment tests. Seven different off-axis loading directions from 0 degrees to 90 degrees related to the main bamboo fiber direction at an interval of 15 degrees in the panel plane were considered. The different failure patterns, stress-displacement curves, and the corresponding full-field surface strain measured through the digital image correlation (DIC) method are reported. The loading angles significantly influenced the embedment performance of unidirectional bamboo panel specimens, and the strength values decreased with the increasing off-axis loading angles. A difference of 35% in the strength values between 0 degrees and 90 degrees loading specimens was observed. However, quasi-isotropic embedment properties were noticed for the multidirectional laminated engineered bamboo panels. The capacity functions were provided to predict the mean off-axis embedment strength and characteristic strength values by inputting the characteristic density values into the functions. Compared with the characteristic strength values estimated through the statistical method, with a 95% probability of exceedance and 75% significant level, the conventional capacity-function method underestimated the off-axis embedment strength values, and thus may leading to an overconservative design. The statistical characteristic embedment strength values are suggested to be used to calibrate the safety factor of capacity equations given by wood standards. Results from this research can be used to predict the ultimate strength of glubam joints under complex loading conditions and obtain reliable design values for engineering applications.

Effect of Rod Diameter and Adhesive Thickness to the Pull-out Strength of Threaded Steel Rod Glued in Laminated Bamboo

Axially Loaded Single Threaded Rod Glued in Glubam Joint

Experimental performance of threaded steel glued into laminated bamboo

Experimental Study on Axial Pull-Out Behavior of Steel Rebars Glued-In Glubam

Mechanical Behavior of Glued-in GFRP Rod in Glubam: Experimental and Analytical Study

Pull-out Strength for Glued-in Rod Parallel to the Grain of Structural Guled Laminated Bamboo

Experimental Research on Dowelled Connection of GluBam-Concrete Composite Beams

Mechanical Properties of Aged Glue Laminated Bamboo for Structural Members

Experimental study and analysis of the bond-anchorage properties of laminated flattened-bamboo lumber connections with glued-in steel rod

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Design Embedment Strength Of Plybamboo Panels Used For Glubam

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

Study on Pull-out Strength for Glued-in Rod Parallel to the Grain of Pinus Massoniana Lamb Glulam

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Experimental Studies on Bolted Glubam Connections

Impact Toughness and Quasi-Static Bending Strength of Glubam

An Experimental Study on Shear Strength of Glubam

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

Bending Performance of Glubam Beams Made with Different Processes

Bond Behavior Between Softwood Glulam and Epoxy Bonded-In Threaded Steel Rod