Pull-out Strength for Glued-in Rod Parallel to the Grain of Structural Guled Laminated Bamboo

Zhang Xiubiao,Jiang Zehui,Sun Zhengjun,Wu Xiuming,Liu Huanrong

DOI: https://doi.org/10.3969/j.issn.1000-5382.2015.04.021

2015-01-01

Journal of Northeast Forestry University

Abstract:With structural glued laminated bamboo as study object, we used two-component epoxy to study the pull-out strength of glued in rod, and tested the specimens in pull-pull configuration.We also studied the influence of edge distances, glue thickness and the slenderness ratio on pull-out strength.The edge distances had certain effect on pull-out strength, the pull-out strength was decreased when the edge distance was too small;because the glulam was cracking in this case, the recommended edge distances was 4d ( d is the rod diameter ) .The glue thickness had insignificant effect on pull-out strength.The slenderness ratio has an important effect on pull-out strength.The pull-out strength was increased with the slenderness ratio increasing, and there was a critical embedded depth making the pull-out strength of glued-in rod equal to the yield strength of the steel rod.The nominal shear strength of glulam/adhesive was decreased with slenderness ratio in-creasing.We got the mean pull-out strength of a single axially loaded rod set parallel to the grain.The main failure modes were glulam cracking, shear failure along the rod and yielding of the rod.