Abstract:In view of the great differences of the seepage law of the fractured rock with or without filling materials,and that most of the seepage fractures in the engineering rock mass are the shear sliding fractures filled with the original rock broken materials,the research of the influence on seepage discharge caused by the factors such as loading paths,axial compression,confining pressure,fracture depth,particle size of original rock fillings etc.,has important reference value to the selection of the seepage parameters and the stability discrimination of the rock slope. With the experimental study of the fracture seepage aiming at the sandstone with artificial cutting fractures in Yichang area,some conclusions are drawn as follows:(1) The metrical data of seepage discharge do not have the repeatability before filling sand grains are tightly. It is not only under the influence of the axial pressure loading path,but also under the influence of the confining pressure way. The seepage velocity tends to be stable with repeatability after more than four times of loading and unloading cycles under axial pressure and confining pressure. (2) There is a linear relationship between the axial pressure and the seepage discharge of large opening fracture with solid fillings when the fracture depth is less than 2.5 cm,then after the fracture depth reaches 2.5 cm,the relationship becomes nonlinear. And it is mainly because that the increasing fracture depth induces the increment of the change possibility of the sand position and structure. (3) To the fractured rock mass with fillings,the influence of the confining pressure is significant,but to the big opening fracture without fillings,the influence of the confining pressure on the seepage discharge is little,it is because the order of the shape variable of rock mass caused by the confining pressure is too small compared to the wetted cross-section of the fracture with big opening. (4) When axial pressure is less than 0.03 MPa or confining pressure is bigger than 1 MPa,the effect of filling granularity on seepage discharge has the nature of randomness. When axial pressure is more than 0.03 MPa and confining pressure is bigger than 1 MPa,the bigger the sand particle size is,the bigger the corresponding seepage velocity is. At the moment,the bigger the axial pressure is,the more the effect of filling granularity on seepage discharge is. Size relationships and proportions of three different granularity corresponding velocities are stable with the growth of confining pressure.

Seepage Flow Properties of a Columnar Jointed Rock Mass in a True Triaxial Experiment

Study on Shear Strength Characteristics of Columnar Jointed Basalt Based on in-situ Direct Shear Test at Baihetan Hydropower Station

Experimental Study on the Strength Failure Characteristics of Columnar Jointed Rock Masses under Three-Dimensional Stress

Study on the Strength Characteristics of Columnar Jointed Basalt with a True Triaxial Apparatus at the Baihetan Hydropower Station

Experimental Investigations on Short-Term and Creep Anisotropic Mechanical Behavior of Artificial Columnar Jointed Rock Masses

Experimental Study on Grouting Seepage Characteristics of Single-Fractured Rock Masses with Different Inclination Angles under Three-Dimensional Stress

Study on the Mechanical and Permeability Evolution of a Composite Rock Mass in an Aquifuge Under Hydraulic Coupling

A New Method to Investigate the Size Effect and Anisotropy of Mechanical Properties of Columnar Jointed Rock Mass

Study of Seepage-Rheology Coupling Experiment of Rocks

Anisotropic Seepage Analysis Of A Concrete-Faced Rockfill Dam

Influence Analysis of Anisotropy on Seepage Behavior of Jishixia Concrete-Faced Rockfill Dam

Anisotropic mechanical behaviors of columnar jointed basalt under compression

Anisotropic Characteristic Strength and Energy Evolution of Irregular Columnar Jointed Rock Masses Before and After Excavation

Seepage stability analysis of a deep-buried tunnel in fractured rocks based on a non-Darcy hydro-mechanical coupled method

Evolution of Contact State during Shear of Rough Rock Joints and Its Influence on Seepage Characteristics

Study on the Anisotropy of Strength Properties of Columnar Jointed Rock Masses Using a Geometric Model Reconstruction Method Based on a Single-Random Movement Voronoi Diagram of Uniform Seed Points

Geometrical characteristic investigation of the Baihetan irregular columnar jointed basalt and corresponding numerical reconstruction method

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

The Seepage Evolution Mechanism of Variable Mass of Broken Rock in Karst Collapse Column under the Influence of Mining Stress

EXPERIMENTAL STUDY OF SEEPAGE IN YICHANG FRACTURED SANDSTONE WITH TIGHT ORIGINAL ROCK FILLINGS

Research and microscopic analysis of seepage characteristics of sandstone under low-frequency cyclic loading