Abstract:Leakage is a common defect of embankment dam slopes, and is usually accompanied by internal erosion. This study establishes a mathematical two-phase seepage coupling model that explicitly considers the effects of internal erosion. With the help of finite element software COMSOL Multiphysics ® , we use this model to study the characteristics of fluid seepage, the fraction of leakage volume that is made up of migrated fine particles (migrated fine particles volume fraction), porosity, permeability, and displacement in the leakage process of a three-dimensional embankment dam slope, as well as to study the influence of the water level and leakage outlet size on the aforementioned features. Our results show that water seepage velocity gradually increases with time, especially at the downstream leakage outlet. Therefore, the erosion and migration of fine particles occur primarily at the downstream leakage outlet, resulting in a significant increase in the migrated fine particles volume fraction, porosity, and permeability. In addition, the maximum migrated fine particles volume fraction, the maximum porosity, and the maximum permeability in the slope increase nonlinearly with time. Curves for maximum displacement with a strength reduction factor can be divided into three stages: the early stable stage, the midterm nonlinear growth stage (creeping state), and the later rapid growth stage (instability state). We also find that the rise of the water level promotes the erosion and migration of fine particles on the slope and that the maximum migrated fine particles volume fraction and the maximum porosity increase with the water level. The values of the strength reduction factor for the creeping state decrease as the water level rises. Furthermore, the larger the size of the downstream leakage outlet, the larger the maximum migrated fine particles volume fraction and maximum porosity. However, the relationship between maximum displacement and strength reduction factor is nearly unaffected by the size of the leakage outlet.

Anisotropic Seepage Analysis Of A Concrete-Faced Rockfill Dam

Influence Analysis of Anisotropy on Seepage Behavior of Jishixia Concrete-Faced Rockfill Dam

FEM Seepage Analysis of Concrete-Faced Rockfill Dam under the Condition of Cracked Face Plate

Numerical Analysis of Seepage for Concrete Face Rockfill Dam with Cracks Based on Block Equivalent Continuum Method

3D Finite Element Simulation Analysis of Dam Seepage Based on Heat Conduction Theory

Numerical Simulation of a 3D Seepage Field of an Asphaltic and Concrete Core Rockfill Dam in an Arid Area

Calculation Methods for the Permeability Coefficient of Concrete Face Rockfill Dam with Cracks

Stress-deformation analysis of a concrete-faced rockfill dam on thick overburden layers

Three-dimensional refined analysis of seismic cracking and anti-seismic measures performance of concrete face slab in CFRDs

Slaking Deformation Analysis for Jishixia Concrete Faced Rockfill Dam

Three-dimensional Seismic Response Analysis of a Concrete-Faced Rockfill Dam on Overburden Layers

Wet Swelling Effect on Crack Performance of Facing Concrete for Rockfill Dams

Analysis on Stress and Deformation of Jishixia Face Rockfill Dam

Numerical modeling of soil–structure interface of a concrete-faced rockfill dam

A Numerical Analysis of the Leakage Characteristics of an Embankment Dam Slope With Internal Erosion

Two-dimensional DEM-FEM coupling analysis of seismic failure and anti-seismic measures for concrete faced rockfill dam

Examining the Seismic Behavior of Rock-Fill Dams Using DEM Simulations

Time-dependent Deformation in High Concrete-Faced Rockfill Dam and Separation Between Concrete Face Slab and Cushion Layer

Three-dimensional Analysis for the Wetting Deformation of Gongboxia Concrete Faced Rock-Fill Dam on the Yellow River

Seismic Response Analysis of Concrete-Faced Rockfill Dams with Dual Mortar Contact Method

Deformation and Stability Analysis of a Core Rockfill Dam with Leakage