Abstract:The physical and mechanical characteristics of rock-filled dam are analyzed,and the element type and contact element type are determined.According to experiment data and research results,the Duncan-Chang non-linear constitutive model is selected to denote the stress strain character of rockfill,and the rockfill material parameter is also determined.The incremental construction process of rockfill dams was numerically simulated,using "birth and death" element supplied by ANSYS.The numerical simulation results indicate that:in the completion period,the maximal vertical deformation which is located on 1/2 height of the dam is 0.4 m,accounting for 0.51 percent of the dam height.The maximum horizontal displacement which is located on 1/3 height of the dam is 0.17 m.The maximum stress in y coordinate is 1.39 MPa;the maximum third principal stress is 0.14 MPa,which shows that the stress in completion period is mainly caused by the self-gravity of the rockfill body.The deformations of peripheral joints and vertical joints of the concrete face in different periods are simulated.The contact model between concrete face and rockfill body,concrete face and concrete face is done with contact element supplied by ANSYS.The numerical simulation results indicate that:in the nearby river valley,vertical joints are closed;and in the nearby bank,vertical joints are opened.The maximum opening is 2 mm;and in the nearby river valley,peripheral joints have the most maximum opening,which is 17.9 mm.Finite element simulation results provide a theoretical basis for deformation reserved in completion period and the joint material of peripheral joints and vertical joints.

Analysis on Stress and Deformation of Jishixia Face Rockfill Dam

3D FEM Analysis of Stress and Deformation of Jinfoshan Concrete Facing Rockfill Dam

3-D FEM Analysis of Stress and Deformation of Xilongchi Concrete-faced Rockfill Dam

Slaking Deformation Analysis for Jishixia Concrete Faced Rockfill Dam

Stress-deformation analysis of a concrete-faced rockfill dam on thick overburden layers

Three-dimensional Finite Element Elasto-Plastic Analysis of Zipingpu Concrete Faced Rock-Fill Dam

RESEARCH ON JOINT SIMPLIFIED MODEL AND EFFECTS OF JOINT PARAMETERS ON PANEL STRESS AND JOINT DISPLACEMENTS OF FACED ROCKFILL DAM

Non-Linear Analysis Of Stress And Strain Of Concrete-Faced Rockfill Dam For Sequential Impoundment Process

Numerical Simulation of Deformation Behavior of Concrete-faced Rockfill Dam

Influence of Weak Rock on Stress-Deformation of Auxiliary Dam 1 # of Xilongchi Upper Reservoir

Finite Element Analysis of Long-Term Stress-Deformation Behavior for Concrete-Faced Rockfill Dam

Nonlinear Analysis of Stress and Strain for a Clay Core Rock-Fill Dam with FEM

Three-dimensional Analysis for the Wetting Deformation of Gongboxia Concrete Faced Rock-Fill Dam on the Yellow River

Static and Dynamic Analysis of High Concrete-Faced Rockfill Dam Based on Generalized Plastic Model

Numerical Simulation for Stability Analysis of Concrete Face Rockfill Dam

Residual Deformation Behavior of Rock-Fill Materials

Safety evaluation with observational data and numerical analysis of Langyashan reinforced concrete face rockfill dam

A Practical Method to Simulate Mechanical Characters of Excavation Materials Mixture in Jishixia CFRD

Stress Analysis and Anti-Extruding Rupture Measures for Face Slabs of High Concrete-Faced Rock-Fill Dams

Experimental Study of Dynamic Properties of Materials of a Faced Rockfill Dam

Elasto-Plastic Dynamic Finite Element Analysis of an Earth-Rockfill Dam