Abstract:The piston crank mechanism is an important component of a reciprocating piston engine. It is an inherent vibration system, and as such, the calculation of unbalance quantity is a critical procedure in balancing mechanism design, which is adopted to balance inertia loading. The traditional method usually applies a Taylor series expansion with the crank-conrod ratio, then a Fourier transform with the crank angle. The Taylor expansion generally ignores the influence on calculations resulting from the high order terms. However, the high order terms of the Taylor expansion will also contribute to the low order terms in the Fourier series. This will induce poor precision in the inertia loading calculation, especially in a high crank-conrod ratio engine. Thus, this paper proposes a new closed-form method, which only adopts a Fourier transformation for the calculation. The coefficients of the Fourier transformation terms contain the contributions of all order terms of the crank-conrod ratio. Therefore, we named it as a closed-form method. Compared with the traditional method, the closed-form method improves the numerical accuracy of the secondary reciprocating inertia force by 1.5%–4%, when the crank-conrod ratio varies from 0.25 to 0.4. Using this new closedform method to design a balancing mechanism, the primary and secondary reciprocating inertia forces can be completely balanced. For an engine, where the primary and secondary inertia forces are balanced, the ratio of the residual inertia force to the total inertia force using the traditional method is 1.5%, while the ratio decreases to 0.5% using the closed-form method. The closed-form method is independent of engine configurations, including centric and eccentric engines, and single and multicylinder engines. Examples of applications using the proposed method are provided.

Determining the Axial Force in the Calculation of Axial Vibrations of the Piston Engine Crankshaft

Analytical Modeling and Finite-Element Computation of Radial Vibration Force in Fractional-Slot Permanent-Magnet Brushless Machines

Dynamic calculation of the crankshaft stress-strain state

Impact of the Piston Secondary Motion on Its Slap Force

A New Closed-Form Method for Inertia Force and Moment Calculation in Reciprocating Piston Engine Design

Finite element analysis of a vehicle diesel engine crankshaft

Force Analysis of Engine Crankshaft Based on Finite Element Method

Finite element analysis for the crankshaft of the piston compressor

Failure Analysis of a Diesel Engine Crankshaft based on Finite Element Modeling

AN EFFICIENT CRANKSHAFT DYNAMIC ANALYSIS USING SUBSTRUCTURING WITH RITZ VECTORS

Multi-body dynamics and finite element method co-simulation for crankshaft dynamical strength analysis

Determination on the Operation Condition of Crankshaft of Diesel Engine and Its Static Strength Analysis

An Analysis of Reaction Forces in Crankshaft Support Systems

An Efficient Journal Bearing Lubrication Analysis For Engine Crankshafts

Methodology for calculating the counterweight mass of a crank-and-rod mechanism

Theoretical investigation of the contributions of the excitation forces to the vibration of an axial piston pump

A New Mechanical Analysis of a Crankshaft-connecting Rod Dynamics Using Lagrange’s Trigonometric Identities

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Evaluation of Model-based Control of Reaction Forces at the Supports of Large-size Crankshafts

Validated Analytical Modeling of Eccentricity and Dynamic Displacement in Diesel Engines with Flexible Crankshaft

Crack Simulation on Diesel Engine Crankshaft using Finite Element Method