Abstract:The classical lightning conductor, which must prevent fire, has to have a sufficiently small resistance. An analogous condition can be formulated for the new challenge: the protection of sensitive electronics against lightning. In this case, the so-called transfer impedance, which gives the interference voltages across a sensitive input per ampere lightning current, must be made small. The arguments for this approach are described. A theoretical description is available and practical experience has been built up over the years, also in high-voltage (HV) research and in power engineering measurements in the field. This approach was used to greatly improve the lightning protection of several installations: a marine radio station, the peripheral equipment of a nuclear power plant, and an electronic siren for a nationwide public warning system. Detailed investigations were requested by our contract partners, together with suggestions for economically acceptable improvements that could be carried out in reasonable time. Later, the correctness of the renovations had to be demonstrated. In the validation measurements, we injected currents into the installation or into relevant parts thereof. The current waveform was chosen fast enough so that inductive effects determined the current distribution. At present, lightning position and tracking system (LPATS) data on lightning strikes near the marine radio station and the nuclear power plant are available to verify the effectiveness of the protection. After our improvements no more damage was reported.

A Fractal-Based Approach to Lightning Protection of Historical Buildings and Monuments: The Parthenon Case Study

Evaluating protection against lightning for historical buildings and cultural heritage monuments

A Regionalized Evaluation Method for Indirect Lightning Stroke Flashover Rate in 10kv Distribution Networks

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

A Comprehensive Framework for Direct Lightning-Structure-Human Interaction Modelling in Heritage Monuments and Safety Assessment

Lightning Protection of Photovoltaic Systems: Computation of the Developed Potentials

Fractal Model of Lightning Channel for Simulating Lightning Strikes to Transmission Lines

Simulation of Lightning Strike in 2-D & 3-D With Fractal Theory and Its Application

Fractal Model and Statistical Characteristics of Lightning Protection Analysis of Transmission Line

A statistical view for fractal simulation of lightning

Validation of the Lightning Fractal Model Based on the Attachment Probability Experiments Using Rod-Rod Air Gaps

Lightning Striking Process Simulation and Its Effects

Advancing lightning risk assessment of pipeline insulating flanges with isolating spark-gap

Study on the Effectiveness of Single Lightning Rods by a Fractal Approach

Reliable protection of electronics against lightning: some practical applications

Experimental Verification of the Lightning Fractal Model Based on Rod-Rod Air Gaps

Experimental and Numerical Evaluation of Surge Current Distribution in Buildings During a Direct Lightning Stroke

Research on the Protection Probability of Guide Strip by Using the Lightning Attachment Model

A Fractal-Based Stepped Downward Leader Model Including Branched Channel Charge Distribution and Branch Fading

Effects of Approximating Recorded Lightning Currents with CIGRE Waveforms on Computed Fast-Front Overvoltages and Critical Lightning Currents Causing Flashover to Overhead Transmission Lines

Calculation of the Maximum Magnetic Field Inside the Lightning Protection System of a Building