Abstract:The wind–sand climate prevalent in the central and western regions of Inner Mongolia results in significant damage to wind turbine blade coatings due to sand erosion. This not only leads to a decline in power generation but also poses safety risks. This study replicated the wind–sand environment of Alashan and numerically simulated the erosion and wear process of the blade coatings of a 1.5 MW horizontal axis wind turbine under rotational conditions using the DPM model. Additionally, erosion tests were conducted on the operating wind rotor in a wind tunnel. The simulation results demonstrate that sand particle trajectories in the rotating domain are influenced by vortex, incoming wind speed, and sand particle size. For small-sized sand particles, variations in wind speed do not substantially alter the number of particles in contact with the wind turbine blades. However, alterations in the momentum of these particles lead to changes in the impact force on the coating surface. Conversely, the change of wind speed will not only alter the number of large-size sand particles in contact with the wind rotor but also modify the impact force on the coating surface. Furthermore, after impacting the blade, small sand particles continue to move along an approximate helical trajectory with the airflow, while large-size sand particles swiftly rebound. Through statistical analysis of erosion pits on the blade surface after the erosion experiments, it was observed that, in comparison among the leading edge, windward side, trailing edge, and leeward side, the leading edge presents the greatest number of erosion pits, whereas the leeward side has the fewest. Along the spanwise direction, the 0.7R-blade tip segment exhibits the highest count, while the blade root-0.3R section displays the fewest number of pits. The wear morphology of the blade coating was observed from the blade root to tip. The leading edge coating exhibits a range from shallow pits to coating flaking and deeper gouge pits. On the windward side, the coating displays wear patterns varying from tiny cutting pits to cutting marks, and then to gouge pits and coating flaking. Erosion morphology of the trailing edge evolves from only minor scratches to spalling pits, further deepening and enlarging. These research findings provide a basis for the study of zoning-adapted coating materials for wind turbine blades in wind–sand environments.

Experimental and Numerical Study of Erosion Wear of Fan Blades in Microgrid

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Numerical study on aerodynamic performance and particle erosion characteristics of flue gas turbine

Sand-Laden Wind Erosion Pair Experimental Analysis of Aerodynamic Performance of the Wind Turbine Blades

Simulation of particle-laden flows and erosion in an axial fan stage considering the relative position of the blades

Multiobjective Optimization Study On the Aerodynamic Performance and Anti-Erosion Characteristics of a Single-Stage Dusty Flue Gas Turbine

Computational Fluid Dynamics Study of Erosion on 900 MW Steam Turbine ND-45 Blades Using 3D Scanning

Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion

Analysis of the Sand Erosion Effect and Wear Mechanism of Wind Turbine Blade Coating

Numerical investigation of sand erosion rate in a horizontal axis wind turbine

Flow Field of Water Drops in A Blade Channel: Numerical Simulation of Water Drop Erosion on Turbine Blades

Study on sediment erosion of high head Francis turbine runner in Minjiang River basin

Numerical study on sediment erosion characteristics of Francis turbine runner

A wind turbine blade leading edge rain erosion computational framework

Water Drop Erosion on Turbine Blades: Numerical Framework and Applications

Investigation on the Erosion Characteristics of Martensitic Blade Steel Material 1cr12w1mov by Micro-Particle Swarm with High Velocity

Numerical Simulation and Experi-mental Measurement of Aerodynamic Performance for a Multi-Blade Centrifugal Fan

Modeling of particle erosion of high-pressure turbine based on dynamic mesh method

Study on the Solid Particle Erosion Characteristic of Top Gas Pressure Recovery Turbine under Variable Working Condition

Experimental Study on Water Erosion Resistance Characteristics to Steam Turbine Blade Material

Experimental Study on the Gas-solid Two Phase Flow and Numerical Prediction of the Blade Surface Erosion in a Louver Coal Concentrator