Abstract:Terrain Awareness and Warning Systems (TAWS) are on-board systems that alert crews to imminent Controlled Flight into Terrain (CFIT). Originally required by the FAA in 1974 for all Part 121 aircraft, this technology has advanced to include GPS data, terrain and obstacle databases, and sophisticated flight deck displays to provide increasingly accurate and timely alerts. TAWS equipment is capable of generating a set of audible and visual alerts based on the most likely situations which lead to a high risk of CFIT. These include excessive descent rates, excessive vertical deviation from an Instrument Landing System (ILS) glideslope, proximity to terrain with landing gears up, and descent immediately following a takeoff. Although the incident rate of CFIT has been greatly reduced over the past few decades, areas of risk still exist, typically near small airports surrounded by mountainous terrain. Risk also remains due to economic factors. The high cost of hardware and software upgrades delays the universal adoption of the most advanced TAWS equipment. Older equipment is much more likely to generate nuisance alerts-warnings to the crew during periods of low CFIT risk. These nuisance alerts desensitize crews to TAWS, leading to situations where crews may ignore or not fully respond to alerts that indicate real danger. Separately, FAA NextGen efforts are driving major redesigns of airspaces and procedures across the country. The primary factors in redesign focus on minimizing the costs associated with delay and fuel burn; however, these redesigns must also ensure that changes do not introduce new CFIT risks. Current practices depend on incomplete evidence to determine that risk has not increased. The continued elimination of remaining CFIT risk, along with the possibility of introducing new risk during redesign, necessitate a comprehensive TAWS model to understand current and potential hazards. Without a TAWS model to provide rapid feedback during simulated design changes, several months may pass before observing that a design change has increased CFIT risk. In this paper, we describe the construction and validation of a standards-based TAWS model to capture the behavior of a variety of equipment. This paper also describes a process for measuring the effect of procedure redesign on TAWS alert rates. Finally, we include a case study of analyzing approaches into the airport at Eagle, CO—the airport with the highest TAWS alert rates in the country. In this case study, we find that equipment upgrades would eliminate nuisance alerts for aircraft using currently published approach procedures.

Exploration of new algorithms for airborne collision detection and avoidance to meet NextGen capabilities

A Multiple Vehicle Sensing Approach for Collision Avoidance in Progressively Deployed Vehicle Networks.

Understanding Realistic Attacks on Airborne Collision Avoidance Systems

Collision Avoidance Capabilities in High-Density Airspace Using the Universal Access Transceiver ADS-B Messages

Development and operation of the Traffic Alert and Collision Avoidance System (TCAS)

On the Feasibility of Exploiting Traffic Collision Avoidance System Vulnerabilities

Formally Verified Next-Generation Airborne Collision Avoidance Games in ACAS X

Hybrid Communication Protocols and Control Algorithms for NextGen Aircraft Arrivals

Toward collision-free trajectory for autonomous and pilot-controlled unmanned aerial vehicles

ADS-X the Next Gen Approach for the Next Generation Air Transportation System

A Taxonomy for Aerospace Collision Avoidance with Implications for Automation in Space Traffic Management

Modeling terrain awareness and warning systems for airspace and procedure design

Unmanned Aircraft Collision Detection and Avoidance for Dealing with Multiple Hazards

ISAC-Assisted Collision Avoidance Mechanism for Vehicle-to-Infrastructure Systems

Validation of Collision Detection and Avoidance Methods for Urban Air Mobility through Simulation

Optimizing Collision Avoidance in Dense Airspace using Deep Reinforcement Learning

Security analysis of the ADS-B implementation in the next generation air transportation system

A comprehensive survey on non‐cooperative collision avoidance for micro aerial vehicles: Sensing and obstacle detection

High-level modeling and analysis of the traffic alert and collision avoidance system (TCAS)

Dynamic Control Allocation between Onboard and Delayed Remote Control for Unmanned Aircraft System Detect-and-Avoid