Abstract:In recent decades, numerous studies have indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semiconductor as a photocatalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In this paper, the focus is on TiO2. Heterogeneous photocatalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2-containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 by up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photocatalyst was in the foreground of research activities. The aim of this was for coatings to be used as building and construction materials, mainly outdoors, e.g., on building façades on high-traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though there are advantages connected with the application of TiO2, due to its band gap of 3.2 eV, these are limited. TiO2 is effective only in the UV region (ca. 5%) of the solar spectrum with wavelengths λ < 380 nm. Hence, efforts are made here, as in many research studies, to dope TiO2 with transition metals to increase its activity using visible light, which will extend its application to indoor environments. In our studies, experiments were conducted with 0.1% (w/w) and 1% (w/w) Mn-TiO2 admixtures, and the ability of the modified photocatalysts to degrade NO by both solar and indoor illumination was evaluated. The surface chemistry at the air/catalyst interface, governed by the photoelectric characteristics of TiO2 and the formation of reactive oxygen species with co-occurring redox reactions, is reviewed in this paper. The factors affecting the application of TiO2 for the degradation of priority air pollutants as single compounds or mixtures are discussed. We investigated, particularly, the degradation of mixtures of priority compounds at typical concentrations in ambient air and confined spaces. This is a realistic approach, because pollutants are present as mixtures, rather than as individual compounds in ambient and indoor air. Moreover, organic polymers as paint constituents were found to be the primary source for carbonyl formation, e.g., formaldehyde, acetaldehyde, etc., during the heterogeneous photocatalytic processes conducted on TiO2-enriched coatings.

Highly Functionalized Nanostructured Titanium Oxide-Based Photocatalysts for Direct Photocatalytic Decomposition of NOx/VOCs

Photocatalytic NOx abatement: Recent advances and emerging trends in the development of photocatalysts

Photo-Induced Degradation of Priority Air Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—A Mechanistic View of the Processes at the Air/Catalyst Interface

Bifunctional Photocatalysis Toward Efficient NOx Removal Performance and Water Splitting Activity: A Case of TiO2/g-C3N4

Photocatalytic NO removal: complete oxidation and reduction reaction for by-product inhibition and end-product recovery

Hierarchical TiO2-g-C3N4 Photocatalyst with Purification Effect for NOx Oxidation Under Cyan Light

Materials Design and Development of Photocatalytic NOx Removal Technology

Technological solutions for NOx, SOx, and VOC abatement: recent breakthroughs and future directions

Oxygen vacancy engineering of photocatalytic nanomaterials for enrichment, activation, and efficient removal of nitrogen oxides with high selectivity: a review

Breaking the Selectivity Barrier: Reactive Oxygen Species Control in Photocatalytic Nitric Oxide Conversion

Design and mechanism of photocatalytic oxidation for the removal of air pollutants: a review

Photocatalytic oxidation technology for indoor environment air purification: The state-of-the-art

Deactivation and Regeneration of TiO2 Photocatalyst to Oxidize Indoors Volatile Organic Compounds

Recent advances in the elimination of persistent organic pollutants by photocatalysis

Structurally and surficially activated TiO2 nanomaterials for photochemical reactions

Photocatalytic degradation of volatile organic compounds using nanocomposite of P-type and N-type transition metal semiconductors

Surface Modification of TiO 2 by Hyper-Cross-Linked Polymers for Efficient Visible-Light-Driven Photocatalytic NO Oxidation

Enhanced TiO2-Based Photocatalytic Volatile Organic Compound Decomposition Combined with Ultrasonic Atomization in the Co-Presence of Carbon Black and Heavy Metal Nanoparticles

The Synthesis and Photocatalytic Efficacy of Distinct Nano-Oxides in the Breakdown of Organic Contaminants

Enhancing air treatment through controlled fabrication of transition metal-doped titanium dioxide nanocomposites for photocatalytic toluene degradation

Revolutionizing photocatalysis: Unveiling efficient alternatives to titanium (IV) oxide and zinc oxide for comprehensive environmental remediation