Abstract:Vacuum ultraviolet irradiation coupled with photocatalytic oxidation (VUV-PCO) is an efficient and promising method for eliminating pollutants at room temperature; it involves three processes: vacuum ultraviolet (VUV) photolysis, photocatalytic oxidation (PCO), and ozone catalytic oxidation. Herein, toluene was chosen as the representative volatile organic compound (VOC), which is one of the most important precursors to form fine particulate matter and photochemical smog, because of its high toxicity and extensive existence in industries. All experiments were performed in a fixed-bed continuous-flow reactor that contained units for VUV photolysis and PCO. Mesoporous P-Mn-TiO2 was prepared by one-step hydrolysis and used as a catalyst for the oxidation of gaseous toluene under VUV irradiation through the VUV-PCO process. The as-prepared P-Mn-TiO2 samples were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), ultraviolet-visible light (UV-Vis) spectroscopy, and X-ray diffraction (XRD) analysis to determine the physicochemical properties of the catalysts and to determine the mechanisms of Mn doping and phosphoric acid modification and the effects of these processes on photocatalytic activity, ozone catalytic activity, and adsorption performance. The results indicated that the synergistic effect of phosphoric acid modification and Mn doping can improve the ozone catalytic activity and photocatalytic performance by increasing the number of oxygen active sites, completely eliminating the outlet ozone, and simultaneously promoting the efficient degradation of toluene. Moreover, doping TiO2 with Mn3+ significantly enhanced light harvesting, and numerous oxygen vacancies can be generated on the catalyst surface because of the presence of doped Mn3+ in the lattice, which adsorbs and transforms the oxygen species for toluene degradation. In addition, modification with an appropriate amount of phosphate groups can facilitate O-2 and O-3 adsorption on the TiO2 surface that can favor photo-induced charge carrier separation, thereby significantly improving the photocatalytic and ozone catalytic activities. The excellent catalytic performance of mesoporous P-Mn-TiO2 for toluene degradation and outlet ozone elimination was ascribed to the formation of highly reactive oxidizing species such as O(1D), O(3P), and center dot OH via the catalytic decomposition of O-3 adsorbed on the oxygen vacancy sites containing Mn and phosphate groups on the catalyst surface. In the VUV-PCO process, toluene was first destructed via VUV photolysis and oxidized by residual O-3 generated from VUV photolysis and the active oxygen species formed in the presence of the catalyst. Finally, toluene and the generated intermediate products were oxidized and degraded to CO2 and H2O through VUV-PCO. In addition, the outlet ozone byproduct was simultaneously eliminated by the multifunctional catalyst.

Enhanced TiO2-Based Photocatalytic Volatile Organic Compound Decomposition Combined with Ultrasonic Atomization in the Co-Presence of Carbon Black and Heavy Metal Nanoparticles

VOCs degradation with non-thermal plasma and Ag-MnOx catalysis

Regulation of Electron Density in Pt Nanoparticles Via Bimetallic Metal-Organic Frameworks for Enhancing Photothermal Catalysis of Toluene Decomposition

Photocatalytic degradation of volatile organic compounds using nanocomposite of P-type and N-type transition metal semiconductors

Enhancing air treatment through controlled fabrication of transition metal-doped titanium dioxide nanocomposites for photocatalytic toluene degradation

Catalytic oxidation of VOCs over Mn/TiO2/activated carbon under 185 nm VUV irradiation

Enhanced Photo-Degradation of Gaseous Toluene over MnOx/TiO2/activated Carbon under a Novel Microwave Discharge Electrodeless Lamps System

Ternary multifunctional catalysts of polymeric carbon nitride coupled with Pt-embedded transition metal oxide to enhance light-driven photothermal catalytic degradation of VOCs

Optimizing Nanoscale TiO2 for adsorption-enhanced photocatalytic degradation of low-concentration air pollutants

Efficient Vocs Photodegradation Through Local Ion Substitution in Tio2-C Composites Derived from Mil-125(Ti)

Mechanistic insights into toluene degradation under VUV irradiation coupled with photocatalytic oxidation

Study on Photocatalytic Degradation of Indoor Air VOCs: Toluene over TiO2 Nanoparticles

Carbon Nitride Quantum Dots Modified TiO2 Inverse Opal Photonic Crystal for Solving Indoor VOCs Pollution

Trimesoyl Chloride-Melamine Copolymer-TiO2 Nanocomposites as High-Performance Visible-Light Photocatalysts for Volatile Organic Compound Degradation

Deactivation and Regeneration of TiO2 Photocatalyst to Oxidize Indoors Volatile Organic Compounds

Ultrasonic-assisted synthesis of TiO2/MWCNT/Pani nanocomposite: Photocatalyst characterization and optimization of efficient variables in the degradation of benzene via RSM-CCD

Abatement of VOCs Mixture of Emerging Concern by VUV-PCO Process: from Lab to Pilot Scale.

Decomposition of Toluene Using Nanosecond- Pulsed-Discharge Plasma Assisted with Catalysts

Deep Oxidation of Toluene Via Combining a Bifunctional Catalyst with VUV Photolysis

Enhancement of light-driven adsorption efficacy through the integration of NiCo2O4 onto CeO2 for photo-ozone catalytic degradation of toluene

Phosphate- and Mn-Modified Mesoporous TiO2 for Efficient Catalytic Oxidation of Toluene in VUV-PCO System