Abstract:A new electrode configuration was proposed to improve the performance of color ac plasma display panels (PDPs). ITO electrodes on the front plate of a PDP were used as auxiliary sustain electrodes, which were electrically isolated from the metal electrodes by a dielectric isolation layer. When this type of PDP operates, the sustain voltage waveforms are only applied to the metal electrodes, so the ITO electrodes always lie in floating potentials. By numerical simulation, the microdischarge process in a PDP cell with floating auxiliary electrodes was analyzed, and the influence of the insulation layer thickness on the cell electrical parameters was investigated. It was found that a discharge in the cell was firstly generated at the narrow gap between a pair of floating electrodes, and then it grew into a long-path discharge including a positive column region between a pair of metal electrodes. Two 12-inch test panels having this floating-electrode-type cell structure were fabricated, together with two other test panels as references having a conventional cell structure and a regular long-gap cell structure, respectively, and their electrical and optical characteristics were measured and compared to each other. The results indicate that the PDP with floating electrodes can achieve a high luminance and a high luminous efficacy at a relatively low sustain voltage.

27.1: Invited Paper: High Efficiency Plasma Display Discharges

Xe-excitation efficiency and plasma saturation in plasma display microdischarges

Plasma display panel design for simultaneous high efficacy and high luminance

Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

Transient Optical Emission Characteristics in Gas Discharge of AC Plasma Display Panel

Infrared Radiation Spectrum of Alternating Current Plasma Display Panels

Effects of Xe Gas Content and Total Gas Pressure on the Discharge Characteristics of Colour Plasma Display Panels

Mechanism of high luminous efficacy in plasma display panel with high secondary electron emission coefficient cathode material analyzed through three-dimensional fluid model simulation

Study of Improving Luminous Efficacy of Plasma Display Panel in Sustain Period with Nanosecond Pulse Drive of Adjustable Waveform

Alternating Current Plasma Display Panel with Two Trigger Discharge Sites and Its Driving Techniques

Effects of Sustaining Voltage on Optical and Electrical Parameters of Color Alternating Current Plasma Display Panel

Study of ultra-violet efficiency in plasma display panel with various coplanar gap

Ion and Neutral Energy Distributions to the MgO Surface and Sputtering Rates in Plasma Display Panel Cells

Plasma enhancement of current from carbon cathodes for field emission displays

Effect of surface photoemission on discharge in PDP

Self-sustaining discharge condition of Penning gases mixture in plasma display panels

Electrical and Optical Characteristics of a Color Alternating Current Plasma Display Panel with Floating Electrodes

Vacuum Ultraviolet Radiation of Color Plasma Display Panel

Novel Electrodeless Flat Back-light for LCD

Development of panel structure for a high-resolution 21-in-diagonal full-color surface-discharge plasma display panel

Sustain Driving Method With High-Impedance State For Plasma Display Panel