Abstract:Performance of natural magnetorheological elastomers. This article investigates the impact of magnetic particle content and various secondary carbon‐based filling materials on the mechanical properties, microstructure, magnetism, and viscoelasticity of magnetorheological elastomers (MREs) derived from natural rubber (NR) and butadiene rubber (BR). MREs composites with different formulations were prepared by using NR/BR blend (abbreviated as NB) as matrix and introducing carbonyl iron powder (CIP), few‐layer graphene (FLG), and carbon nanotube (CNT) as reinforcing fillers. The compressive mechanical properties, magnetorheological effect (MR Effect) and stress relaxation behavior of MREs under magnetic field were analyzed through microstructure characterization and macroscopic properties testing. The experimental results show that compared with the samples added CIP, FLG, and CNT, NB‐60CIP‐FLG has the best performance, which significantly improves the tensile mechanical properties, the stress of 300% set elongation is increased by 336.3%, the compressive properties are significantly increased by 92.7%. The performance of the NB‐60CIP‐CNT is also excellent, its 300% set elongation stress increased by 323.4%, in addition, its compression performance significantly improved by 79.2%. After the addition of the magnetic field, MR effect and magnetic response performance of the NB‐60CIP‐CNT sample were improved by 75.2% and 6.3%, while the MR effect and magnetic response performance of the NB‐60CIP‐FLG sample were improved by 49.9% and 18.8% compared with NB‐60CIP. In addition, the damping performance of secondary carbon‐based filling materials on MREs is also improved. This article discusses the influence of CIP content, filler type, and magnetic field intensity on the performance of MREs, highlighting its considerable importance for practical applications in production. Highlights MREs composites were prepared by using NR/BR blend as matrix. Carbonyl iron powder and graphene were used as reinforcing fillers. The carbon‐based fillers has improved the mechanical properties of MREs. The magnetic field has a significant effect on the performance of MREs.

The dynamic compressive properties of magnetorheological plastomers: enhanced magnetic-induced stresses by non-magnetic particles

The dynamic mechanical properties of magnetorheological plastomers under high strain rate

Magneto-induced large deformation and high-damping performance of a magnetorheological plastomer

A high-performance magnetorheological material: Preparation, characterization and magnetic-mechanic coupling properties

Novel Magnetorheological Plastomer Filled with NdFeB Particles: Preparation, Characterization, and Magnetic–Mechanic Coupling Properties

Effect of secondary particles on the microstructure and mechanical properties of magnetorheological plastomers

The designation and mechanical properties of magnetorheological plastomer

Response Characteristic of the Magnetorheological Plastomer under Different Varying Magnetic Fields

The Strengthening Effect of 1D Carbon Materials on Magnetorheological Plastomers: Mechanical Properties and Conductivity

Recent Progress on the Magnetorheological Plastomers

Magnetic field dependent electro-conductivity of the graphite doped magnetorheological plastomers

Creep and recovery behaviors of magnetorheological plastomer and its magnetic-dependent properties

The Magnetic Field Dependent Dynamic Properties of Magnetorheological Elastomers Based on Hard Magnetic Particles

Synergistic effect of magnetic particles and secondary carbon‐based filling materials on the properties of natural rubber/butadiene rubber magnetorheological elastomers

Analysis of Styrene-Butadiene Based Thermoplastic Magnetorheological Elastomers with Surface-Treated Iron Particles

Simulation of Magneto-Induced Rearrangeable Microstructures of Magnetorheological Plastomers

Improving the Magnetorheological Properties of Polyurethane Magnetorheological Elastomer Through Plasticization

Magneto-Induced Microstructure Characterization of Magnetorheological Plastomers Using Impedance Spectroscopy

Magnetic Field-Induced Compressive Property of Magnetorheological Elastomer under High Strain Rate

Dynamic Behavior of Magnetically Responsive Shear-Stiffening Gel under High Strain Rate

A Study of the Heat Transfer Properties of CIP Doped Magnetorheological Elastomers