Abstract:The composite phase change material (PCM) consisting of phase change paraffin (PCP) and polymethyl methacrylate (PMMA) was prepared as a novel type of shape-stabilized PCM for building energy conservation through the method of bulk polymerization. The chemical structure, morphology, phase change temperature and enthalpy, and mechanical properties of the composite PCM were studied to evaluate the encapsulation effect of PMMA on PCP and determine the optimal composition proportion. FTIR and SEM results revealed that PCP was physically immobilized in the PMMA so that its leakage from the composite was prevented. Based on the thermo-physical and mechanical properties investigations, the optimal mass fraction of PCP in the composite was determined as 70%. The phase change temperature of the composite was close to that of PCP, and its latent heat was equivalent to the calculated value according to the mass fraction of PCP in the composite. For estimating the usability in practical engineering, thermal stability, reliability and temperature regulation performance of the composite were also researched by TG analysis, thermal cycling treatments and heating-cooling test. The results indicated that PCP/PMMA composite PCM behaved good thermal stability depending on the PMMA protection and its latent heat degraded little after 500 thermal cycling. Temperature regulation performance of the composite before and after thermal cycling was both noticeable due to its latent heat absorption and release in the temperature variation processes. The PCP/PMMA phase change plate was fabricated and applied as thermal insulator in miniature concrete box to estimate its temperature regulation effect under the simulated environmental condition. It can be concluded that this kind of PCP/PMMA shape-stabilized PCM with the advantages of no leakage, suitable phase change temperature and enthalpy, good thermal stability and reliability, and effective temperature regulation performance have much potential for thermal energy storage in building energy conservation.

Preparation and Energy Storage Properties of a Lauric acid/Octadecanol Eutectic Mixture

Preparation, Property and Application of Phase Change Material Emulsions

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Preparation and thermal performance of methyl palmitate and lauric acid eutectic mixture as phase change material (PCM)

Preparation and Properties of LA-MA/PMMA Composite Phase Change Material for Thermal Energy Storage

Preparation and properties of fatty acid eutectics/expanded perlite and expanded vermiculite shape-stabilized materials for thermal energy storage in buildings

Preparation and Characterization of Capric-Palmitic-stearic Acid Ternary Eutectic Mixture/expanded Vermiculite Composites As Form-Stabilized Thermal Energy Storage Materials

Preparation and Thermal Properties of Fatty Acid/diatomite Form-Stable Composite Phase Change Material for Thermal Energy Storage

Synthesis and Characterization of Disodium Hydrogen Phosphate Dodecahydrate-Lauric-Palmitic Acid Used for Indoor Energy Storage Floor Units

Form-Stable Phase Change Materials Based on Eutectic Mixture of Tetradecanol and Fatty Acids for Building Energy Storage: Preparation and Performance Analysis

Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage

Preparation and characterization of lauric-myristic-palmitic acid ternary eutectic mixtures/expanded graphite composite phase change material for thermal energy storage

Preparation and Performance of Capric-Myristic Acid Binary Eutectic Mixtures for Latent Heat Thermal Energy Storages

Preparation and Thermal Properties of 1-Hexadecanol-Palmitic Acid Eutectic Mixture/Activated Carbon Composite Phase Change Material for Thermal Energy Storage

Preparation and Properties of Phase Change Material by Microencapsulation of Lauric Acid for Thermal Regulation

Preparation and characterization of lauric acid–stearic acid/expanded perlite as a composite phase change material

A novel bio-based phase change material of methyl palmitate and decanoic acid eutectic mixture: Thermodynamic modeling and thermal performance

Development of a new composite material for building energy storage based on lauric acid-palmitic acid-paraffin ternary eutectic and expanded perlite

Preparation and Properties of Paraffin/PMMA Shape-stabilized Phase Change Material for Building Thermal Energy Storage

Preparation and performance study of modified diatomite based PCM for construction

Preparation and performance of lauric acid phase change material with the double-layer structure for solar energy storage