Abstract:Lauric acid (LA) shows much potential as one organic phase change material (PCM) for thermal energy storage, owing to its suitable melting point, relatively high thermal/chemical stability and latent heat. However, the LA-based thermal storage method invariably suffers from the big challenges of liquid leakage tendency and low thermal conductivity of single lauric acid, limiting immensely its practicality. Herein, one encapsulation and modifying strategy to fabricate high conductive and low liquid leakage composite phase change materials (CPCMs) for photo-thermal storage was proposed by constructing novel graphene doped LA/g-C3N4 CPCM. Firstly, LA is infiltrated into a novel two-dimensional porous matrix – the graphitic phase carbon nitride (g-C3N4) to prevent liquid leakage in the solid-liquid phase change process. Then it is further incorporated with a certain amount of graphite nanoplatelets to further enhance thermal conductivity. The encapsulation and modifying strategy enable the graphene doped LA/g-C3N4 to show excellent thermal storage performance for both heat and light energy, low liquid leakage, and high thermal stability. The hybrid LA/g-C3N4 with 5 wt% graphene (CPCM3) modification has a melting temperature of 45.88 °C and enthalpy of 159.19 J/g. The corresponding solidification temperature and enthalpy are 43.36 °C and 144.40 J/g, respectively. Its thermal conductivity at 50 °C is enhanced to 0.9338 W/(m·K) (one time higher than single LA), also superior to the state-of-the-art LA-based CPCMs. After 100 thermal cycles, the composite phase change material only suffers low mass loss and latent heat loss of phase change, which proves the good thermal reliability. Furthermore, TGA and DTG data indicate that CPCM3 can maintain good thermal stability in the normal operating temperature range. In the whole, the joint effect of the porous g-C3N4 matrix and graphene modification improve the thermal storage performance of LA through the improvement of liquid immobilization and thermal conductivity. This work provides a promising strategy for fabricating high conductive and low liquid-leakage CPCM toward enhanced photo-thermal storage.

Preparation and performance of lauric acid phase change material with the double-layer structure for solar energy storage

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Enhanced Thermal Conductive Lauric Acid/G-C3n4/Graphene Composite Phase Change Materials for Efficient Photo-Thermal Storage

A novel composite phase change material from lauric acid, nano-Cu and attapulgite: Preparation, characterization and thermal conductivity enhancement

Preparation and Thermal Performances of Lauric Acid/Polyvinyl Butyral/Graphene Nanoplates Composite Phase Change Materials

Preparation and Properties of Phase Change Material by Microencapsulation of Lauric Acid for Thermal Regulation

Preparation and Characterization of Lauric Acid/Modified Fly Ash/Graphene Composite as Low-Cost and Eco-Friendly Phase Change Materials for Thermal Energy Storage

Investigating the optical absorption and thermal conductivity of nano-enhanced lauric acid phase change material for energy storage application

Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application

Development of carbon-coated aluminosilicate nanolayers composite shape-stabilized phase change materials with enhanced photo-thermal conversion and thermal storage

Preparation and characterization of lauric acid-stearic acid/fumed silica/expanded graphite thermally conductive enhanced composites

Preparation and characterization of lauric acid–stearic acid/expanded perlite as a composite phase change material

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

Preparation and thermal performance of methyl palmitate and lauric acid eutectic mixture as phase change material (PCM)

Thermal performance enhancement of lauric acid using nanomaterials as composite phase change material

Preparation and performance study of modified diatomite based PCM for construction

Thermal properties optimization of lauric acid as phase change material with modified boron nitride nanosheets-sodium sulfate for thermal energy storage

Solvent-Assisted Nanochannel Encapsulation of a Natural Phase Change Material in Polystyrene Hollow Fibers for High-Performance Thermal Energy Storage

Preparation and Characterization of Lauric–Myristic Acid/Expanded Graphite as Composite Phase Change Energy Storage Material

Palmitic Acid/polyvinyl Butyral/expanded Graphite Composites As Form-Stable Phase Change Materials for Solar Thermal Energy Storage

Low cost, eco-friendly, modified fly ash-based shape-stabilized phase change material with enhanced thermal storage capacity and heat transfer efficiency for thermal energy storage