Abstract:The control of the performance of single-walled carbon nanotube (SWCNT) random network-based transistors is of critical importance for their applications in electronic devices, such as complementary metal oxide semiconducting (CMOS)-based logics. In ambient conditions, SWCNTs are heavily p-doped by the H2O/O2 redox couple, and most doping processes have to counteract this effect, which usually leads to broadened hysteresis and poor stability. In this work, we coated an SWCNT network with various common polymers and compared their thin-film transistors' (TFTs') performance in a nitrogen-filled glove box. It was found that all polymer coatings will decrease the hysteresis of these transistors due to the partial removal of charge trapping sites and also provide the stable control of the doping level of the SWCNT network. Counter-intuitively, polymers with electron-withdrawing functional groups lead to a dramatically enhanced n-branch in their transfer curve. Specifically, SWCNT TFTs with poly (vinylidene fluoride) coating show an n-type mobility up to 61 cm2/Vs, with a decent on/off ratio and small hysteresis. The inverters constructed by connecting two ambipolar TFTs demonstrate high gain but with certain voltage loss. P-type or n-type doping from polymer coating layers could suppress unnecessary n- or p-branches, shift the threshold voltage and optimize the performance of these inverters to realize rail-to-rail switching. Similar devices also demonstrate interesting antiambipolar performance with tunable on and off voltage when tested in a different configuration.

The dynamics of polymerized carbon nanotubes in semiconductor polymer electronics and electro-mechanical sensing

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

The Effect of Carbon Nanotube Chirality on the Electrical Conductivity of Polymer Nanocomposites Considering Tunneling Resistance

Unidirectional Electron-Tunnelling Flexible PDMS Strain Sensor with Aligned Carbon Nanotubes

A carbon nanotube strain sensor for structural health monitoring

Superior Piezoresistive Strain Sensing Behaviors of Carbon Nanotubes in One-Dimensional Polymer Fiber Structure

The synergetic relation of flexural strain behaviors and electrical signals of carbon nanotube-based polymer laminates

Tunneling Resistance Model for Piezoresistive Carbon Nanotube Polymer Composites

Carbon Nanotube Electroactive Polymer Materials: Opportunities and Challenges

Preparation and Force-Sensitive Properties of Carbon Nanotube/Polydimethylsiloxane Composites Films

Development of 3D carbon nanotube interdigitated finger electrodes on polymer substrate for flexible capacitive sensor application

Anisotropic Strain-Field-Induced Change of the Electronic Conductivity of Graphene Sheets and Carbon Nanotubes

Development of a 3D Distributed Carbon Nanotubes on Flexible Polymer for Normal and Shear Forces Measurement

Fabrication of Patterned Carbon Nanotube (CNT) / Elastomer Bilayer Material and Its Utilization As Force Sensors

Development Of Patterned Carbon Nanotubes On A 3d Polymer Substrate For The Flexible Tactile Sensor Application

Comprehensive evaluation of the piezoresistive behavior of carbon nanotube-based composite strain sensors

Polymer nanocomposite thin films prepared using single- and multi-walled carbon nanotubes for flexible electronics

Carbon Nanotube Yarn Strain Sensors

Ultrathin CNTs Film Based on Marangoni Effect for Strain Sensing Application

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

Elastomeric Core/Conductive Sheath Fibers for Tensile and Torsional Strain Sensors