Abstract:Traditional cam movements in piston pumps follow a non-stopping motion law, resulting in insufficient smoothness in plunger stroke changes. Consequently, this directly impacts the theoretical flow rate of the pump. To address this issue, describes the transition curve of the non-stopping motion law is constructed in this study by using a fivefold B-spline curve. The maximum uncaused velocity and acceleration are considered optimization parameters. Multi-objective optimization of the motion law is conducted using a genetic algorithm, resulting in the generation of a Pareto solution set. Compared to the modified equivalent acceleration (MEA) motion law, the B-spline combined motion law leads to a reduction of 1.39% and 0.86% in the maximum velocity and acceleration characteristic values, respectively. Furthermore, by employing the principle of a single-parameter surface envelope, a mathematical model of the cam surface is developed. The obtained data points are then solved using the double-three times B-spline cam surface interpolation algorithm. Subsequently, the interpolation result is translated into a cam surface model file based on the data structure of the IGES file.The optimization results demonstrate that compared to equal acceleration and deceleration motion laws, the B-spline optimization curve achieves a seamless transition. Specifically, the maximum pressure angle decreases from 27.98° to 19.92°, and the minimum radius of curvature decreases from 9.94 mm to 7.44 mm, validating the accuracy of the theoretical analysis. Experimental displacement tests are conducted on the spatial cam mechanism, revealing that the cam design process has been streamlined, and the designed spatial cam exhibits enhanced fitting performance.

Optimization and synthesis of a cam-linkage mechanism with a swing follower with variable pivot

Optimization Design for Complicated Relative Motion of Swinging Component-Planar Fixed Cam Mechanism

Optimal Design of the High-speed Traversing Cam Mechanism for Complex Follower Motion

Design of a novel coaxial cam-linkage indexing mechanism

Parameter Optimization of Large-Size High-Speed Cam-Linkage Mechanism for Kinematic Performance

Optimization and Simulation of Focus-driving Cam-link Combination Mechanism

Improving Cam Profile Design Optimization Based on Classical Splines and Dynamic Model

Design and Optimization of CAM Connecting Rod System in High-Speed Drives Based on Dynamic Characteristics and Mathematical Model

A Practical Approach for Kinetic Analysis of Cam-linkage Mechanisms

Research on Constant-Diameter Cam Mechanism with A Planar Motion Follower

Analysis of follower motion law and optimization of fitting function in reverse design of cam

Optimal Synthesis Of The Slider-Crank Mechanism For Path Generation Based On The Generalized Kinematic Mapping Of Constrained Plane Motions

Mathematical Modeling and Optimization of Cam Mechanism in Delivery System of an Offset Press

Design and Optimization of an Adjustable Electromechanical Actuator

Dimension synthesis of the conjugate cam mechanism with translating flat-faced pushrod follower

Design and optimization of complex mechanism flip shaping subsystem based on genetic algorithm and rigid-flexible coupled dynamic model

Optimization of the Rest-rotate Roller's Cam Contour in High-speed Single-sheet Offset

Study on the Effect of Curvature Radius Sudden Change on Mechanism Characteristics for the Constant-Breadth Two Circular-Arc Cam Mechanism with an Inclined Flat-Faced Follower

Synthesis and Analysis of a Novel Linkage Mechanism with the Helical Motion of the End-Effector

Dynamic design of cam mechanism with constraints of response and strength

Optimization and Modeling of a Spatial CAM Mechanism for a Two-Dimensional Plunger Electro-Hydraulic Pump