Abstract:The cam-linkage mechanism is a typical transmission mechanism in mechanical science and is widely used in various automated production equipment. However, conventional modeling methods mainly focus on the design and dimensional synthesis of the cam-linkage mechanism in the slow-speed scenario. The influence of component dimensions is not taken into consideration. As a result, the model accuracy dramatically falls when analyzing large-size cam-linkage mechanisms, especially in high-speed environments. The kinematic aspects of cam design have been investigated, but there are few studies discussing the motion characteristic and accuracy analysis models of the large-size cam-linkage mechanism under high-speed scenarios. To handle such issues, this paper proposes a parameter optimization methodology for the design analysis of the large-size high-speed cam-linkage mechanism considering kinematic performance. Firstly, the mathematical model of the cam five-bar mechanism is presented. The cam curve and motion parameters are solved forward with linkage length and output speed. Then, a particle swarm-based multi-objective optimization method is developed to find the optimal structure parameters and output speed curve to minimize cam pressure angle and roller acceleration and maximize linkage mechanism drive angle. A Monte Carlo-based framework is put forward for the reliability and sensitivity analysis of kinematic accuracy. Finally, a transverse device of a sanitary product production line is provided to demonstrate the applicability of the proposed method. With the parameter optimization, the productivity of the transverse device is doubled, from 600 pieces per minute (PPM) to 1200 PPM.

Optimal Design of the High-speed Traversing Cam Mechanism for Complex Follower Motion

Optimization and synthesis of a cam-linkage mechanism with a swing follower with variable pivot

High speed feed control algorithm with piecewise linear continuous jounce

Analysis of 3D Curve Expansion of Conical Cam with Oscillating Tapered Roller Follower

Design of the High-Speed Cam Profile for the Multi-Dof Follower

Optimization of the Rest-rotate Roller's Cam Contour in High-speed Single-sheet Offset

An Integrated C4-Spline Interpolation and Time-Free Global Optimization Methodology Applied to High-Speed Cam Motion Design

Improving Cam Profile Design Optimization Based on Classical Splines and Dynamic Model

Parameter Optimization of Large-Size High-Speed Cam-Linkage Mechanism for Kinematic Performance

Optimization Design for Complicated Relative Motion of Swinging Component-Planar Fixed Cam Mechanism

Study of Segmented Modeling Method and Designing System on Movement Law of Cam Follower

Analysis of follower motion law and optimization of fitting function in reverse design of cam

Mathematical Modeling and Optimization of Cam Mechanism in Delivery System of an Offset Press

Study on the Effect of Curvature Radius Sudden Change on Mechanism Characteristics for the Constant-Breadth Two Circular-Arc Cam Mechanism with an Inclined Flat-Faced Follower

Dynamic design of cam mechanism with constraints of response and strength

A novel framework for high-speed cam curve synthesis: piecewise high-order interpolation, pointwise scaling and piecewise modulation

Optimal Synthesis Of The Slider-Crank Mechanism For Path Generation Based On The Generalized Kinematic Mapping Of Constrained Plane Motions

Design and optimization of complex mechanism flip shaping subsystem based on genetic algorithm and rigid-flexible coupled dynamic model

Design and Optimization of CAM Connecting Rod System in High-Speed Drives Based on Dynamic Characteristics and Mathematical Model

Quick and Accurate Design on Roller Follower Disc Cam

A Practical Approach for Kinetic Analysis of Cam-linkage Mechanisms