Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Behaviour and design of duplex stainless steel CHS stub columns at elevated temperature

Structural Behaviour and Fire Design of Duplex and Ferritic Stainless Steel CHS Stub Columns

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

Design of Austenitic and Duplex Stainless Steel SHS and RHS Beam-Columns

Experimental and numerical study of hot-rolled duplex stainless steel CHS columns

Design of high strength steel columns at elevated temperatures

BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES

Residual compressive behavior of 6063-T5 aluminium alloy SHS and RHS stub columns

Performance of CFDST stub columns using high-strength steel subjected to axial compression

Stub Column Tests on Stainless Steel Built-Up Sections

Experimental investigations on material properties and stub column behaviour of high strength steel irregular hexagonal hollow sections

Cross-section behaviour of cold-formed high strength steel irregular hexagonal hollow section stub columns under combined compression and bending

Numerical investigation and design for the local buckling behaviour of high strength steel hexagonal hollow section stub columns under axial compression

Local Buckling Behaviour of Stainless-Clad Bimetallic Steel Built-Up Square Hollow Section Stub Columns

Experimental investigation of cold-formed stainless steel built-up closed section stub columns

Numerical study and design of S35657 stainless steel welded stub columns

Analytical Behavior of CFDST Stub Columns with External Stainless Steel Tubes under Axial Compression

FE Modelling and Fire Resistance Design of Concrete Filled Double Skin Tubular Columns

Analytical behaviour of concrete-filled double skin steel tubular (CFDST) stub columns

Post-fire cross-sectional behaviour of hot-rolled austenitic stainless steel channel section stub columns under combined compression and minor-axis bending

Overall Buckling Behaviour and Design of High-Strength Steel Welded Section Columns