Abstract:Friction stir welding (FSW) is a solid-state joining process used to weld dissimilar aluminum alloys with varying material properties and compositions. Unlike traditional welding methods, FSW does not involve melting the materials being welded but instead uses a rotating tool to heat and stir the materials until they are in a plastic state. The process results in a welded joint with high strength, excellent ductility, and minimal distortion, making it a popular choice in various industries, including aerospace, automotive, and marine. AA6061-T6 (Mg-Si) and AA7075 (Al-Zn-Mg-Cu) aluminum alloys are one of the most popular grades of aluminum alloys used in current manufacturing industries, such as aerospace and automotive, joined by the Friction Stir Welding Process (FSW) technique. Taguchi orthogonal array (L9) experimental design was applied to reduce the number of insignificant factors in the process. First, the study determines three welding factors: rotation speed, travel speed, and pin eccentricity. Investigations found that travel speeds significantly on tensile strength (Ts) and elongation ( %El), but the rotational speed and tool eccentricity did not affect Ts and %El. Furthermore, considering the fabricated parameters on the hardness (HV) of the joint, it was found that all factors unaffected the HV of the joint zone at a 95 % confidence level. Next, examine the microstructure; Mg2Al3 and Al2O3 intermetallic compounds were found in the weld. Therefore, investigating the crystallite size found that welding significantly affects the crystallite size. Finally, consider the fracture surface, experimental condition A2B1C2 (optimal parameter), which is the parameter with the highest tensile strength having dimple fracture characteristics. On the other hand, the welding condition A1B3C3, the parameter with the lowest tensile strength, Small and fine dimple fracture with cleavage fracture. Because the material is highly ductile and can undergo large deformations before it is damaged. On the other hand, materials with low tensile strength exhibiting cleavage fracture indicate that the materials are brittle and can break easily under stress

Optimization of Friction Welding Parameters to Maximize the Tensile Strength of Magnesium Alloy with Aluminum Alloy Dissimilar Joints Using Genetic Algorithm

Optimizing the process parameters in Friction stir Spot Welding Of Dissimilar Aluminum Alloys Using Genetic Algorithm

Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints

Optimization of process parameters of friction stir welded joints of dissimilar aluminum alloy by response surface methodology

Mechanical behavior and microstructure of dissimilar aluminium/titanium rotary friction weld joints

Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061–T6 and AA5052–H32)

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Development of mechanical property prediction model and optimization for dissimilar aluminum alloy joints with the friction stir welding (FSW) process

Optimization of the Welding Parameters of High-Quality Aluminum/Copper FSSW Joints Using Taguchi Method Combined with Back Propagation Neural Network and Genetic Algorithm

Friction Stir Welding of AZ31B Magnesium Alloy with 6061-T6 Aluminum Alloy: Influence of Processing Parameters on Microstructure and Mechanical Properties

An Experimental Study On Friction Stir Welding Of Aluminum-Magnesium Alloys For Improved Mechanical Properties Of Tailor Welded Blanks.

Mathematical modeling and optimization of friction stir welding process parameters for armor-grade aluminium alloy

The Effect of Chamfer Angle Variations on the Quality of Friction Welding Results of AZ-31B Magnesium

Modeling and Optimization of Friction Stir Welding Parameters for Joining Dissimilar Aluminum Alloys

Optimization of 2024-T3 Aluminum Alloy Friction Stir Welding Using Random Forest, XGBoost, and MLP Machine Learning Techniques

Experimental Research on the Wear Properties of Friction Stir Welded Al–Li/Al–Mg Improved Heterogeneous Material Joints

Optimization of Friction Stir Welded Dissimilar Aluminum Alloys EN AW-5083-H111 and EN AW-6082-T651 using Hybrid Taguchi-Based Grey Relation Analysis

Effect of Alloying Foil on the Friction Stir Weld Quality of Mg Alloy Joints

Simulation and Experimental Investigation of Friction Stir Welded Wrought Magnesium Alloy AZ31B

Optimization of FSW Parameters Using SA Algorithm and ANFIS-Based Models to Maximize Mechanical Properties of AZ80A Mg Alloy Joints

Joining of Dissimilar Al and Mg Metal Alloys by Friction Stir Welding