Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

European traffic on road bridges and recalibration of damage equivalence factor for fatigue verification

Site-Specific Fatigue Load Spectrum for Urban Bridges

DESIGN PROCEDURES FOR FOOTBRIDGES SUBJECTED TO WALKING LOADS: COMPARISON AND REMARKS

Field Destructive Testing of a Reinforced Concrete Bridge Deck Slab

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands

ESS-based Probabilistic Fatigue Life Assessment of Steel Bridges: Methodology, Numerical Simulation and Application

Infrastructure‐level traffic micro‐simulation for probabilistic analysis of bridge loads

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Improved bridge capacity rating methods based on system reliability assessment

Residual life assessment of the historical road riveted bridges

Bridge Rating Using System Reliability Assessment. I: Assessment and Verification by Load Testing

Bridge Load Testing for Identifying Live Load Distribution, Load Rating, Serviceability and Dynamic Response

Application of a new method for probabilistic fatigue analysis from strain measurements on bridges

Innovative hierarchical fatigue analysis of critical riveted railway bridges: A case study

Safety assessment of an existing bridge deck subject to different damage scenarios through the global safety format ECOV

Verbesserte Restlebensdauerberechnung von stählernen Eisenbahnbrücken – Grundsatzstudie zur Eignung von Schadensäquivalenzfaktoren λ

Fatigue assessment of a composite railway bridge for high speed trains. Part I: Modeling and fatigue critical details

Safety assessment of existing prestressed reinforced concrete bridge decks through different approaches