Abstract:In this research, we synthesized new organic dyes, called BS-1–8, based on acrylamide/2-pyridone for use in dye-sensitized solar cells (DSSCs). These dyes were designed with a D-π-A configuration and underwent molecular engineering to fine-tune their spectral properties and energy levels. Through a comprehensive analysis combining experimental and theoretical approaches, we investigated various aspects of these dyes, including their optical, electrochemical, photovoltaic, geometrical, and electronic features. The newly developed dyes exhibited strong absorption in the UV–visible range, characterized by high molar extinction coefficients. Upon sensitization with BS-1–8, the efficiency of DSSCs ranged from 2.83 % to 5.01 %. Acrylamide-based sensitizers (BS-1–4) achieved efficiencies ranging from 3.82 % to 5.01 %, while 2-pyridone-based sensitizers (BS-5–8) scored between 2.83 % and 3.57 %. Notably, when co-sensitized with N719 at concentrations of 0.2–0.3 mM, the DSSCs showed a significant increase in power conversion efficiencies ( PCEs ) ranging from 7.85 % to 9.01 %, compared to 7.50 % for DSSCs sensitized with N719 alone. Specifically, the performance of 0.2 mM BS-4 was 20 % better than that of N719. This improvement in PCEs can be attributed to the enhanced Voc (open-circuit voltage) achieved through co-sensitization, highlighting the potential benefits of using sensitizers to develop more efficient DSSCs. The highest achieved PCE was 9.01 %, accompanied by a Jsc (short-circuit current density) of 20.07 mA.cm −2 and a Voc of 0.732 V for the mixed co-sensitizers (0.2 mM BS-4 + 0.2 mM N719). These findings indicate that the combination of co-sensitization is a promising strategy for developing efficient D-π-A-type sensitizers and evaluating DSSC performance. Additionally, the study of incident photon-to-current efficiency ( IPCE ) and electrochemical impedance spectroscopy (EIS) provided insights into the mechanisms contributing to these improvements. Overall, these results suggest that BS-1–8 sensitizers have significant potential for advancing the development of more efficient DSSCs.

Acid@base co-sensitization strategy for highly efficient dye-sensitized solar cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Enhance the Performance of Co-Sensitized Solar Cell by a Series Efficient Pyridine-Anchor Co-Adsorbents of N,N′-bis((pyridin-2-yl)methylene)-p-phenylenediimine and a Ruthenium Dye of N719

Advanced Cd-Ii Complexes As High Efficiency Co-Sensitizers For Enhanced Dye-Sensitized Solar Cell Performance

Photocurrent Enhancement by Employing 2,6-Bis[1-(2,4,6-trimethyl-phenylimino)ethyl]Pyridine as a Co-Sensitizer with Ruthenium in Dye Sensitized Solar Cell

Boosting DSSC efficiency via acid-base co-sensitization with N-1 dye

Effect of small-size co-sensitizer on acid-base co-sensitization system of dye-sensitized solar cells

Synthesis of MD‐1‐2 co‐sensitizers for 10.35% efficient acid–base pairing with N3 in DSSCs

Large Enhancement of Dye Sensitized Solar Cell Efficiency by Co-sensitizing Pyridyl- and Carboxylic Acid-Based Dyes

A combination of fluorine-induced effect and co-sensitization for highly efficient and stable dye-sensitized solar cells

Cyanoacetamide co-sensitizers DY-1 and DY-2: Unveiling a promising path to highly efficient photovoltaic devices

Theoretical Study of High-Efficiency Organic Dyes with the Introduction of Different Auxiliary Heterocyclic Acceptors Based on IQ1 Toward Dye-Sensitized Solar Cells.

A new co-sensitization method employing D–π–A dye with pyridyl group and D–π–Cat dye with catechol unit for dye-sensitized solar cells

Amplifying performance through co-sensitization of Acrylamide/2-Pyridone dyes in DSSCs

Study of the microscopic mechanism of stepwise charge injection in co-sensitive DSSCS in the framework of D-PI-A dye and chlorophyll

Enhanced Performance Of Quasi-Solid-State Dye-Sensitized Solar Cells By Tuning The Building Blocks In D-(Pi)-A '-Pi-A Featured Organic Dyes

Engineering Diketopyrrolopyrrole Sensitizers For Highly Efficient Dye-Sensitized Solar Cells: Enhanced Light Harvesting And Intramolecular Charge Transfer

Enhanced Efficiency of Dye-Sensitized Solar Cells by Controlled Co-Adsorption Self-Assembly of Dyes

An efficient strategy for designing high-performance DSSCs: Using the terminal auxiliary acceptor to improve electronic transitions

Unleashing synergistic co-sensitization of BOA dyes and Ru(ii) complexes for dye-sensitized solar cells: achieving remarkable efficiency exceeding 10% through comprehensive characterization, advanced modeling, and performance analysis