Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Core loss prediction and measurement in magnetic bearing

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

A Loss Measurement Approach of Power Magnetic Components under Practical Power Electronics Conditions

A DC Differential Method for Core Loss Measurement under Sinusoidal Excitation

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

High Frequency Magnetic Core Loss Study

Comparative Analysis of Core Loss Calculation Methods for Magnetic Materials Under Nonsinusoidal Excitations

Eddy Current Loss Analysis of Sliding Bearing for Active Excitation Magnetic Fluid Lubrication

Parameters design and characteristics analysis of E-core radial magnetic bearings

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Loss Estimation of Brushless Doubly-Fed Generator with Hybrid Rotor Considering Multiple Influence Factors

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Novel Empirical Model for Calculation of Core Losses in Permanent Magnet Machines

Core Loss Analysis and Modeling of a Magnetic Coupling System in WPT for EVs

Comparative Analysis of Magnetic Core Loss Measurement Methods with Arbitrary Excitations

Core loss calculation for magnetic materials employed in SMPS under rectangular voltage excitations

Analysis of Electric Motor Magnetic Core Loss under Axial Mechanical Stress

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

The Fem Calculation Of Iron Loss In The Active Magnetic Bearing

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure