Abstract:Electron beam melting (EBM), as an excellent Additive Manufacturing (AM) technology, enables the printing of Ti-6Al-4V alloy for a wide range of applications such as aerospace and biomechanical industries. It improves functionality and integrity of components and negates complexities in assembly processes. However, due to the poor surface and sub-surface integrity represented by the rough surface finish and low dimensional accuracy, achieving a favorable surface condition is quite challenging. Therefore, post processing becomes essential for these electron beam melted (EBM-ed) Ti-6Al-4V alloys. Being the most common technique to improve such parts, milling of Ti-6Al-4V alloy is very challenging and resulting tool wear issues, due to its unique material properties. Thus, this paper presents a comprehensive study on the surface integrity of EBM-ed Ti-6Al-4V parts processed by precision grinding and electropolishing, aiming to qualitatively and quantitatively clarify the interrelation between process parameters and processed surface quality. The surface and subsurface characteristics such as profile accuracy, surface roughness, microstructure, defective layer and residual stress before and after post processing were compared and evaluated. The results show that by precision grinding, the profile accuracy was improved from over 300 µm PV to 7 µm PV, while surface roughness (Ra) was reduced from 30 µm to about 2 µm. The layer with partially melt particles was removed, but introduced a deformed subsurface layer with more residual stress. Then by applying electropolishing, the residual stress was released and the deformed layer was removed. In addition, Ra was further reduced to 0.65 µm. The research can serve as a reference for the integration of post machining processes with AM.

The Electropolishing of Additively Manufactured Parts in Titanium: State of the Art

Effects of Shot Peening and Electropolishing Treatment on the Properties of Additively and Conventionally Manufactured Ti6Al4V Alloy: A Review

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

Electropolishing of Additively Manufactured Ti-6Al-4V Surfaces in Nontoxic Electrolyte Solution

Review—Electropolishing of Additive Manufactured Metal Parts

Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review

Design of titanium alloys by additive manufacturing: A critical review

Application of electrochemical polishing in surface treatment of additively manufactured structures: A review

Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing

A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys

Sustainable Recovery of Titanium Alloy: From Waste to Feedstock for Additive Manufacturing

Powder Metallurgy Strategies to Improve Properties and Processing of Titanium Alloys: A Review

Plasma electrolytic polishing-induced surface chemical and structural evolutions of additively manufactured Ti-6Al-4 V coupons

Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application

Cutting-Edge Additive Manufacturing Technology for Titanium-Based Alloys

A Novel Hybrid Ultrasound Abrasive-Driven Electrochemical Surface Finishing Technique for Additively Manufactured Ti6Al4V Parts

Effect of electropolishing on mechanical property enhancement of Ti6Al4V porous materials fabricated by selective laser melting

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

Microstructure and Mechanical Properties of Titanium Alloys Produced by Additive Technologies: New Approaches and Promising Areas of Research

Additive manufacturing of titanium alloys via selective laser melting: Fabrication, microstructure, post-processing, performance and prospect