Abstract:Si anodes have attracted considerable attention for their potential application in next-generation lithium-ion batteries because of their high specific capacity (Li15Si4, 3579 mAh g-1) and elemental abundance. However, Si anodes have not yet been practically applied in lithium-ion batteries because the volume change associated with lithiation and delithiation degrades their capacity during cycling. Instead of considering the active material, we focused on the structural design and developed a scalable process for producing Si anodes with excellent cycle characteristics while precisely controlling the morphology. Al-Si alloy powders were prepared by gas atomization, and porous Si with a skeletal structure was prepared by leaching Al using HCl. Porous Si (p-Si12, p-Si19) prepared from Al88Si12 and Al81Si19 comprised resinous eutectic Si, and porous Si (p-Si25) prepared from Al75Si25 comprised lumpy primary Si and resinous eutectic Si. The porosity of the Si anodes varied from 63% to 76%, depending on the Si composition. The p-Si19 anode displayed the finest pore distribution (20-200 nm), excellent rate characteristics, a reversible discharge capacity of 1607 mAh g-1 after 200 cycles at a rate of 0.1 C with a Coulombic efficiency of over 97%, and high stability. The performances of the p-Si25 and p-Si19 electrodes began to decrease after 250 and 850 cycles, respectively, with a constant-charge capacity of 1000 mAh g-1 and at a rate of 0.2 C. In contrast, the p-Si12 anode maintained its discharge capacity at 1000 mAh g-1 for up to 1000 cycles without degradation. Therefore, the developed manufacturing process is expected to produce porous Si as an active material in lithium-ion batteries for high capacity and long life at an industrial scale.

Porous silicon from industrial waste engineered for superior stability lithium-ion battery anodes

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Green synthesis of high-performance porous carbon coated silicon composite anode for lithium storage based on recycled silicon kerf waste

Production of porous silicon from silicon wafer waste for Li-ion batteries via low load metal assisted catalytic etching

Scalable Fabrication of Micro-Sized Bulk Porous Si from Fe–Si Alloy As a High Performance Anode for Lithium-Ion Batteries

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

High-Value Utilization of Silicon Cutting Waste and Excrementum Bombycis to Synthesize Silicon–Carbon Composites as Anode Materials for Li-Ion Batteries

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

Facile preparation of the silicon/carbon composite anodes from photovoltaic industry waste for lithium-ion batteries

Recycling of photovoltaic silicon waste for high-performance porous silicon/silver/carbon/graphite anode

Scalable Synthesis of Porous Silicon by Acid Etching of Atomized Al-Si Alloy Powder for Lithium-Ion Batteries

Recycling Silicon Waste from the Photovoltaic Industry to Prepare Yolk–Shell Si@void@C Anode Materials for Lithium–Ion Batteries

Preparation of WSi@SiOx/Ti3C2 from photovoltaic silicon waste as high-performance anode materials for lithium-ion batteries

Cost-effective preparation of high-performance Si@C anode for lithium-ion batteries

Low-cost silicon cutting waste reused as a high-power-density silicon-based anode

Low-cost and Scalable Preparation of Nano-Si from Photovoltaic Waste Silicon for High-Performance Li-ion Battery Anode

Porosity Controlled Synthesis of Nanoporous Silicon by Chemical Dealloying As Anode for High Energy Lithium-Ion Batteries.

Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes