Abstract:We report a quantitative and systematic method for determining 3D-printing and surface-treatment conditions that can help improve the optical quality of direct-printed microfluidic devices. Digital light processing (DLP)-stereolithography (SLA) printing was extensively studied in microfluidics owing to the rapid, one-step, cleanroom-free, maskless, and high-definition microfabrication of 3D-microfluidic devices. However, optical imaging or detection for bioassays in DLP-SLA-printed microfluidic devices are limited by the translucence of photopolymerized resins. Various approaches, including mechanical abrasions, chemical etching, polymer coatings, and printing on transparent glass/plastic slides, were proposed to address this limitation. However, the effects of these methods have not been analyzed quantitatively or systematically. For the first time, we propose quantitative and methodological determination of 3D-printing and surface-treatment conditions, based on optical-resolution analysis using USAF 1951 resolution test targets and a fluorescence microbead slide through 3D-printed coverslip chips. The key printing parameters (resin type, build orientation, layer thickness, and layer offset) and surface-treatment parameters (grit number for sanding, polishing time with alumina slurry, and type of refractive-index-matching coatings) were determined in a step-wise manner. As a result, we achieved marked improvements in resolution (from 80.6 to 645.1 lp/mm) and contrast (from 3.30 to 27.63% for 645.1 lp/mm resolution). Furthermore, images of the fluorescence microbeads were qualitatively analyzed to evaluate the proposed 3D-printing and surface-treatment approach for fluorescence imaging applications. Finally, the proposed method was validated by fabricating an acoustic micromixer chip and fluorescently visualizing cavitation microstreaming that emanated from an oscillating bubble captured inside the chip. We expect that our approach for enhancing optical quality will be widely used in the rapid manufacturing of 3D-microfluidic chips for optical assays.

3D visualization of mold filling stages in thermal nanoimprint by white light interferometry and atomic force microscopy

Hydrodynamics and solid mechanics structural analysis of mold deformation in nanoimprint lithography

High fidelity 3D thermal nanoimprint with UV curable polydimethyl siloxane stamps

Hydrodynamic and Solid Mechanics Analysis of Capillary Force-Induced Mold Deformation in Sub-10 nm UV Nanoimprint Lithography

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Coarse-Grain Simulations of the Polymer Filling Process in Nanolithography

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Numerical Investigation for the Resin Filling Behavior during Ultraviolet Nanoimprint Lithography of Subwavelength Moth-Eye Nanostructure

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale

Effects of Mold Geometries and Initial Resist Thickness on Filling Behavior in UV-Nanoimprint Lithography

Molecular Dynamics Investigation of the Deformation Mechanism of Gold with Variations in Mold Profiles during Nanoimprinting

Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling

In-situ observation on the real-time filling deformation of PMMA into microchannel during hot embossing

Resist deformation and flow fields in microimprint lithography

A Sandwiched Flexible Polymer Mold for Control of Particle-Induced Defects in Nanoimprint Lithography

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices

Three-Dimensional Optical Imaging of Internal Deformations in Polymeric Microscale Mechanical Metamaterials

Visualization and Monitoring of the Injection Molding Process Using Ultrasonic Phased Array

Investigation of Resist Filling Behavior in Microimprint Lithography by Computational Fluid Dynamics Simulation and Defocusing Digital Particle Image Velocimetry

3D Multiscale Micro-/Nanofolds by Femtosecond Laser Intermittent Ablation and Constrained Heating on a Shape Memory Polymer

Toward Defect‐Free Nanoimprinting