Abstract:Ultra-high steel fiber reinforced concrete (UHSFRC) has poor workability and a low cost-performance ratio, and the application of active admixtures can overcome these shortcomings of UHSFRC. This work investigated the feasibility of fly ash (FA) and silica fume (SF) to improve the performance of SFRC and evaluate the effects of FA and SF on the workability, mechanical properties, microstructure, and economic/environmental performance of UHSFRC. The results showed that FA and SF can increase the slump, compressive, and splitting tensile strength of UHSFRC. Compared with control tests, the slump, 28-d compressive, and 28-d splitting tensile strength increased by 43.25 %, 29.35 %, and 55.72 %, respectively. More importantly, microscopic analysis showed that FA and SF have balling, filling, and adsorption effects, and increase peak intensity of C-S-H gel and ettringite, promoting secondary hydration of cement. According to the experimental data and mechanistic analysis, an innovatively optimized ratio prediction model is adopted to establish the relationship between the slump, compressive, and splitting tensile strength of UHSFRC and the content of FA and SF, and the testing error was less than 5 %, indicating that the model is feasible. Moreover, the effect of FA and SF content on cost-performance ratio, carbon emission, and energy consumption of UHSFRC was predicted. The economic/environmental analysis showed the mixing of FA and SF can improve the cost-performance ratio of UHSFRC and reduce carbon emission and energy consumption. This study can provide theoretical guidance for the improvement of the workability and mechanical properties of UHSFRC, and have important research implications for the improvement of the life cycle assessment of UHSFRCs. The results of the study also have some limitations, and further validation is needed for normal steel fiber concrete (compressive strength of 30–60 MPa, with fibers with a length of 30–60 mm and diameter of approx. 1 mm).

Research on optimal design of mechanical properties of hybrid fiber‐reinforced concrete

Mechanical Properties of SFRC: Database Construction and Model Prediction

Property Assessment of High-Performance Concrete Containing Three Types of Fibers

Mechanical Properties of Hybrid Fiber Reinforced Rubber Concrete

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

Mechanical performance of steel-polypropylene hybrid fiber reinforced concrete subject to uniaxial constant-amplitude cyclic compression: Fatigue behavior and unified fatigue equation

Investigation of basic properties, microscopic characteristics, and optimized ratio prediction model of ultra-high steel fiber reinforced concrete

Multiaxial compressive strength of hybrid fiber reinforced concrete: A unified empirical model

Mechanical performance and numerical simulation of high-performance steel fiber reinforced concrete

Dynamic mechanical properties of hybrid fiber reinforced concrete

Hybrid fiber concrete with different basalt fiber length and content

Research on the Impact Response and Model of Hybrid Basalt-Macro Synthetic Polypropylene Fiber Reinforced Concrete

Study on Mechanical Properties and Optimum Fiber Content for Basalt/Polyacrylonitrile Hybrid Fiber Reinforced Concrete

Effect of Basalt/Steel Individual and Hybrid Fiber on Mechanical Properties and Microstructure of UHPC

Multi-Objective Optimization and Mechanical Properties Analysis of Steel-PVA Hybrid Fiber-Reinforced Cementitious Composites

Effect of multi‐scale polypropylene fiber hybridization on compressive constitutive mechanics parameters of roller compacted concrete

Effect of Fiber Hybridization, Strain Rate and w/c Ratio on the Impact Behavior of Hybrid FRC

Static Mechanical Properties and Microscopic Analysis of Hybrid Fiber Reinforced Ultra-High Performance Concrete with Coarse Aggregate

Parametric study for optimizing fiber‐reinforced concrete properties

Statistical Modeling of Compressive Strength of Hybrid Fiber-Reinforced Concrete—HFRC

Research on Layered Steel Fiber Reinforced Concrete Mix Ratio Design Based on Orthogonal Test