Abstract:Using hydroxypropyl terminated polydimethylsiloxane ( HP. PDMS ), isophorone diisocyanate and 2,2-bis( hydroxymethyl ) butyric acid as starting materials, silicone-polyurethane copolymer ( Si-PU ) latexes with particle diameter of about 50 nm were prepared via step-by-step feeding process followed by phase inversion technique in the absence of surfactant. Influences of the HP-PDMS content on the phase structure and the properties of the Si-PU latex films were investigated, and the difference between Si-PU and polyether polyurethane ( E-PU ) was emphasized. It was found that the content of PDMS in Si-PU could reach up to 65 wt%. Results of DSC analysis showed that, in comparison with the E-PU latex film, the Si-PU latex films exhibited well phase separation. Strong hydrogen bonding in Si-PU hard segments was confirmed by FTIR, which promoted the micro. phase separation in the latex films. On the contrary, strong hydrogen bonding existed in between the soft and hard segments in E-PU, which led to phase mixing and prevented the formation of phase separation structure. The Si-PU latex films were characterized by AFM tapping mode and the formation of sea. island phase separation was observed, and this kind of phase separation structure in the Si-PU latex films was rarely reported in the literature, in which the amorphous PDMS. enriched domains constituted the dispersed phases. With the increase in HP. PDMS content, the degree of phase separation in the Si-PU latex films increased as well, which led to the decrease of elastic modulus from 400.0 MPa to 32.2 MPa with an increase in elongation at break and in the flexibility. The initial decomposition temperature of the Si-PU latex films was at about 244 degrees C, which was 18 degrees C lower than that of the E-PU latex film due to the low degree of hydrogen bonding between the soft and the hard segments, whereas the thermal stability of Si-PU at high temperature zone was much better than E-PU. Compare to the E-PU latex film, a low water adsorption rate under 11% and a high contact angle above 94 degrees indicated excellent water resistance of the Si-PU latex films.

Chain and mirophase-separated structures of ultrathin polyurethane films

Spectroscopic Analysis of Ordering and Phase-Separation Behavior of Model Polyurethanes in a Restricted Geometry

Ultrahydrophobicity Of Polydimethylsiloxanes-Based Multilayered Thin Films

Influence of dangling chains on the microphase separation and damping properties of polyurethane

Quantification Characterization of Hierarchical Structure of Polyurethane by Advanced AFM and X-ray Techniques

Influence of the airflow and humidity on the chain aggregation during the film-formation in a flexible waterborne polyurethane formulation

Influence of Dangling Chains on Molecular Dynamics of Polyurethanes

Segmental Orientations and Deformation Mechanism of Poly(Ether-Block-Amide) Films

A Small-Angle X-ray Scattering Study of Microphase Separation Transition of Polyurethanes: Effect of Hard Segments

Preparation and Characterization of Anisotropic Chain Structures in Polyimide Films

Thickness-dependent Molecular Chain and Lamellar Crystal Orientation in Ultrathin Poly(di-N-hexylsilane) Films.

Effect Of Microphase Separation On The Protein Resistance Of A Polymeric Surface

Microstructure Evolution of Reactive Polyurethane Films During In‐Situ Polyaddition and Film‐Formation Processes

Applications of characterization methods in polyurethane materials: analysis of microphase-separated structures

Measuring the Microphase Separation Scale of Polyurethanes with a Vibration-Induced Emission-Based Ratiometric "fluorescent Ruler".

Soft segment composition and its influence on phase-separated morphology of PCL/PEG-based poly(urethane urea)s

Progress in microphase separation of polysiloxane modified polyurethane

A review of microphase separation of polyurethane: Characterization and applications

Preparation and Properties of Phase‐change Heat‐storage UV Curable Polyurethane Acrylate Coating

Investigation on the Preparation of Silicone-polyurethane Latex, Phase Structure and Property of the Latex Films

Insight into the Fracture Properties and Molecular Mechanism of Polyurethane