Abstract:A finite element dynamic model of the sandwich composite plate was developed based on classical laminate theory and Hamilton's principle. A 4-node, 7-degree-of-freedom three-layer plate cell is constructed to simulate the interaction between the substrate, the viscoelastic damping layer, and the piezoelectric material layer. Among them, the viscoelastic layer is referred to as the complex constant shear modulus model, and the equivalent Rayleigh damping is introduced to represent the damping of the substrate. The established dynamics model has too many degrees of freedom, and the obtained dynamics model has good controllability and observability after adopting the joint reduced-order method of dynamic condensation in physical space and equilibrium in state space. The optimal quadratic (LQR) controller is designed for the active control of the sandwich panel, and the parameters of the controller parameters, the thickness of the viscoelastic layer, and the optimal covering position of the sandwich panel are optimized through simulation analysis. The results show that the finite element model established in this paper is still valid under different boundary conditions and different covering methods, and the model can still accurately and reliably represent the dynamic characteristics of the original system after using the joint step-down method. Under different excitation signals and different boundary conditions, the LQR control can effectively suppress the vibration of the sandwich plate. The optimal cover position of the sandwich plate is near the solid support end and far from the free-degree end. The parameters of controller parameters and viscoelastic layer thickness are optimized from several angles, respectively, and a reasonable optimization scheme can be selected according to the actual requirements.

Vibroacoustic analysis of a thin laminated composite plate with surface-boned piezoelectric patches and subjected to general boundary conditions

An Analytical Solution of Three-Dimensional Steady Thermodynamic Analysis for a Piezoelectric Laminated Plate Using Refined Plate Theory

Numerical vibroacoustic analysis of plates with constrained-layer damping patches

Three-Dimensional Semianalytical Solutions For Piezoelectric Laminates Subjected To Underwater Shocks

Time-domain Structural-Acoustic Analysis of Composite Plates Subjected to Moving Dynamic Loads

An improved Fourier series solution for free vibration analysis of the moderately thick laminated composite rectangular plate with non-uniform boundary conditions

Transverse Vibration Analysis of Composite Plates with Multiple Distributed Composite Patches

Vibro-acoustic analysis of laminated composite cylindrical and conical shells using meshfree method

Flexural behaviors and free vibration responses of hybrid plates coupled with piezoelectric laminae

Three-dimensional Semi-Analytical Model for the Static Response and Sensitivity Analysis of the Composite Stiffened Laminated Plate with Interfacial Imperfections

THERMALLY INDUCED VIBRATION ANALYSIS OF THIN COMPOSITE PLATE BASED ON HYBRID ELEMENT MODEL

Free Vibration Analysis of Laminated Composite Double-Plate Structure System with Elastic Constraints Based on Improved Fourier Series Method

Modeling and Vibration Control of Sandwich Composite Plates

Thermo-electro-mechanical vibration analysis for piezoelectric plates under two-parameter elastic foundation with general boundary conditions

Semi-analytical three-dimensional elasticity solutions for generally laminated composite plates

A two-direction cross-iteration solution for in-plane vibrations of thin-walled composite plates with a simplified explicit vibration mechanical model

Free and Forced Vibration Analysis of Carbon/Glass Hybrid Composite Laminated Plates Under Arbitrary Boundary Conditions

Benchmark solution of imperfect angle-ply laminated rectangular plates in cylindrical bending with surface piezoelectric layers as actuator and sensor

Dynamic analysis of layered piezoceramic and metal composite annular plate of moderate thickness

3D Free Vibration Analysis of Cross-Ply Laminated Plates with One Pair of Opposite Edges Simply Supported

The Modeling Method for Vibration Characteristics Analysis of Composite-Laminated Rotationally Stiffened Plate