Abstract:The effectiveness of Carbon Fiber Reinforced Polymer (CFRP) seismic-retrofit of circular Reinforced Concrete (RC) bridge piers under vehicular lateral impact loading is addressed in the present work performing experimental tests. Sixteen 1/3 scale RC bridge piers with circular cross-sections characterized by three different configurations of longitudinal and transverse reinforcements were tested with and without CFRP seismic-retrofit. In the first case, tested columns represent common shear-deficient RC bridge piers designed with obsolete design practice or for non-seismic areas. In the second case, CFRP wrapping is applied according to common seismicretrofit practices to increase the shear capacity and ductility of columns. Experimental tests were carried out under static and lateral impact loading with propped cantilever conditions reproducing a typical short-span viaduct bridge pier configuration. In the static tests, the lateral load was applied monotonically through a hydraulic jacket under equivalent impact conditions. In impact tests, the lateral impact load was applied through a colliding truck equipped with a rigid hammer at the typical vehicular impact location adopting two different impact velocities (3 and 4.5 m/s). A critical investigation of the transient dynamic characteristics, damage evolution, and post-impact damage is conducted by comparing the results obtained with and without CFRP seismic-retrofit, and under static and dynamic loading conditions. It is shown that CFRP seismic-retrofitting of circular RC bridge pier can also be effective in reducing the vulnerability under lateral impact loading. The CFRP-retrofit approach adopted in this study meets the requirement of multi-hazard prevention improving the robustness of the bridge. Finally, a semi-empirical equation for predicting the maximum displacement under impact loading is derived based on experimental results. The proposed equation adopts the results of a static test as a proxy for assessing the dynamic behavior allowing for the design of the required shear and flexural load-carrying capacity.

Seismic fragility estimates for corroding reinforced concrete bridges

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Fragility Assessment of RC Bridges Exposed to Seismic Loads and Corrosion over Time

Simplified Structural Deterioration Model for Reinforced Concrete Bridge Piers under Cyclic Loading 1

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Probabilistic curvature limit states of corroded circular RC bridge columns: Data-driven models and application to lifetime seismic fragility analyses

Time-dependent seismic fragility analysis of reinforced concrete columns subjected to chloride-induced corrosion

Time-Dependent Seismic Demand and Fragility of Deteriorating Bridges for Their Residual Service Life

Performance Assessment of Reinforced Concrete Bridges Under Coupled Horizontal and Vertical Ground Motions Using Fragility Surfaces

Seismic Fragility of a Typical Bridge Using Extrapolated Experimental Damage Limit States

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Seismic resilience assessment of extended pile shaft supported coastal bridges considering scour and uniform corrosion effects

Performance-based seismic resilience and sustainability assessment of coastal RC bridges in aggressive marine environments

Time-Variant Seismic Fragility of Offshore Continuous Beam Bridges Based on Collapse Analysis

Identification of the Most Fragile Component for a Typical RC Bridge Using Seismic Fragility Curves

Probabilistic Lifetime Assessment of Marine Reinforced Concrete with Steel Corrosion and Cover Cracking

Fragility Analysis and Resilience Assessment of the Single-Column Pier Steel-Concrete Composite Bridge Subjected to Seismic Loads

Seismic capacity evaluation of corroded reinforced concrete frame structures

Fragility assessment of RC bridge piers subjected to vehicle collision based on residual load-bearing capacity