Abstract:Purpose Hydrofracturing technology has been widely used in tight oil and gas reservoir exploitation, and the fracture network formed by fracturing is crucial to determining the resources recovery rate. Due to the complexity of fracture network induced by the random morphology and type of fluid-driven fractures, controlling and optimising its mechanisms is challenging. This paper aims to study the types of multiscale mode I/II fractures, the fluid-driven propagation of multiscale tensile and shear fractures need to be studied. Design/methodology/approach A dual bilinear cohesive zone model (CZM) based on energy evolution was introduced to detect the initiation and propagation of fluid-driven tensile and shear fractures. The model overcomes the limitations of classical linear fracture mechanics, such as the stress singularity at the fracture tip, and considers the important role of fracture surface behaviour in the shear activation. The bilinear cohesive criterion based on the energy evolution criterion can reflect the formation mechanism of complex fracture networks objectively and accurately. Considering the hydro-mechanical (HM) coupling and leak-off effects, the combined finite element-discrete element-finite volume approach was introduced and implemented successfully, and the results showed that the models considering HM coupling and leak-off effects could form a more complex fracture network. The multiscale (laboratory- and engineering-scale) Mode I/II fractures can be simulated in hydrofracturing process. Findings Based on the proposed method, the accuracy and applicability of the algorithm were verified by comparing the analytical solution of KGD and PKN models. The effects of different in situ stresses and flow rates on the dynamic propagation of hydraulic fractures at laboratory and engineering scales were investigated. when the ratio of in situ stress is small, the fracture propagation direction is not affected, and the fracture morphology is a cross-type fracture. When the ratio of in situ stress is relatively large, the propagation direction of the fracture is affected by the maximum in situ stress, and it is more inclined to propagate along the direction of the maximum in situ stress, forming double wing-type fractures. Hydrofracturing tensile and shear fractures were identified, and the distribution and number of each type were obtained. There are fewer hydraulic shear fractures than tensile fractures, and shear fractures appear in the initial stage of fracture propagation and then propagate and distribute around the perforation. Originality/value The proposed dual bilinear CZM is effective for simulating the types of Mode I/II fractures and seizing the fluid-driven propagation of multiscale tensile and shear fractures. Practical fracturing process involves the multi-type and multiscale fluid-driven fracture propagation. This study introduces general fluid-driven fracture propagation, which can be extended to the fracture propagation analysis of potential fluid fracturing, such as other liquids or supercritical gases.

Two-Phase Type-Curve Analysis of Flowback Data from Hydraulically Fractured Hydrocarbon Reservoirs

A two-phase type-curve method with multiscale fluid transport mechanisms in hydraulically fractured shale reservoirs

Fracture Characterization During Flowback with Two-Phase Flow in Tight and Ultratight Oil Reservoirs

Semi-Analytical Model for Two-Phase Flowback in Complex Fracture Networks in Shale Oil Reservoirs

A modified approach for modeling two-phase flowback from multi-fractured horizontal shale gas wells

Pressure Buildup Analysis Using Type Curves for a Well in a Pressure-Maintained System

Phase field model for simulating hydraulic fracture propagation and oil–water two-phase flow in reservoir

A two-phase flow model coupled with geomechanics for simulating transient production behaviour in an unconventional reservoir by considering fracture geometry and capillary pressure

Fracture Characterization Using Flowback Water Transients from Hydraulically Fractured Shale Gas Wells

Novel Analytical Solution and Type-Curves for Lost-Circulation Diagnostics of Drilling Mud in Fractured Formation

Semianalytical Modeling for Multiphase Flow in a Fractured Low-Permeability Gas Condensate Reservoir

A Semianalytical Method for Modeling Two-Phase Flow in Coalbed-Methane Reservoirs With Complex Fracture Networks

A Multi-Scale Flow Model for Production Performance Analysis in Shale Gas Reservoirs with Fractal Geometry

A semi‐analytical model for capturing dynamic behavior of hydraulic fractures during flowback period in tight oil reservoir

Case Study: An Approach for Hydraulic Fracturing Minifrac G-Function Analysis in Relation to Facies Distribution in Multilayered Clastic Reservoirs

Study on Flow Line Characteristics and Well Test Interpretation Methods of Multi Branch Fractured Wells in Dual Porous Media

Transient Flow of a Horizontal Well with Multiple Fracture Wings in Coalbed Methane Reservoirs

Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir

Evaluation of Fracture Volume and Complexity of Tight Oil Wells Based on Flowback Data

Lost-circulation diagnostics using derivative-based type-curves for non-Newtonian mud leakage into fractured formation