Abstract:Precious metal catalysts with superior low-temperature activity and excellent thermal stability are highly needed in environmental catalysis field. In this work, a novel two-step incipient wetness impregnation (T-IWI) method was developed for the fabrication of a unique and highly stable CeO2/Al2O3 support (CA-T). Pd anchored on CA-T exhibited a much higher low-temperature catalytic activity and superior thermal stability in carbon monoxide (CO) and hydrocarbon (HC) oxidations, compared to Pd anchored on conventional CeO2/Al2O3 (CA), which was prepared by a one-step IWI method. After aging treatment at 800 °C, the CO oxidation rate on Pd/CA-T (1.69 mmol/(gPd s)) at 120 °C was 4.1 and 84.5 times of those on Pd/CA (0.41 mmol/(gPd s)) and Pd/Al2O3 (0.02 mmol/(gPd s)), respectively. It was revealed that the CA-T support with well-controlled small CeO2 particles (ca. 12 nm) possessed abundant defects for Pd anchoring, which created rich Pd-CeO2 interfaces with strengthened interaction between Pd and CeO2 where oxygen could be efficiently activated. This resulted in the significantly improved oxidation activity and thermal stability of Pd/CA-T catalysts. The T-IWI method developed herein can be applied as a universal approach to prepare highly stable metal oxide-alumina-based supports, which have broad application in environmental catalyst design, especially for automobile exhaust aftertreatment.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.1c00077?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.1c00077</a>.Catalyst characterization details, BET surface areas, CeO2 crystallite sizes, activity data, EXAFS fitting parameters, surface elemental compositions, XRD patterns, HAADF-STEM images, water contact angles, pore size distributions, XANES, Ce 3d and Pd 3d XPS, CO-TPR profiles, in situ DRIFTS, and OSC values (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.1c00077/suppl_file/es1c00077_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phase and facet-engineering of transition alumina leads to (hydro)thermally stable alumina-supported metal catalysts

Controlling the phase transformation of alumina for enhanced stability and catalytic properties

Crystal Facet Induced Single-Atom Pd/CoxOyon a Tunable Metal-Support Interface for Low Temperature Catalytic Oxidation

Embedding Ultrafine and High-Content Pt Nanoparticles at Ceria Surface for Enhanced Thermal Stability.

Formation of a Porous Crystalline Mg1‒ x Al2O y Overlayer on Metal Catalysts via Controlled Solid‐State Reactions for High‐temperature Stable Catalysis

Interface modulation of Pt/Al2O3 catalyst and their roles in thermal stability

Understanding Reactivity and Stability of Rhodium Supported on Different Ceria Facets in Catalytic NO Reduction and CO/Hydrocarbon Oxidation Reactions

Taming the Stability of Pd Active Phases Through a Compartmentalizing Strategy Toward Nanostructured Catalyst Supports

Coking- and Sintering-Resistant Palladium Catalysts Achieved Through Atomic Layer Deposition

A General Dual-Metal Nanocrystal Dissociation Strategy to Generate Robust High-Temperature-Stable Alumina-Supported Single-Atom Catalysts

Stabilization of Exposed Metal Nanocrystals in High‐Temperature Heterogeneous Catalysis

Alumina Over-coating on Pd Nanoparticle Catalysts by Atomic Layer Deposition: Enhanced Stability and Reactivity

A Hydrothermally Stable Single-Atom Catalyst of Pt Supported on High-Entropy Oxide/Al 2 O 3 : Structural Optimization and Enhanced Catalytic Activity

Phosphate-assisted Synthesis of Ultrathin and Thermally Stable Alumina Nanosheets As Robust Pd Support for Catalytic Combustion of Propane

Nanotubular Gamma Alumina with High-Energy External Surfaces: Synthesis and High Performance for Catalysis

Thermally Stable Ag/Al2O3 Confined Catalysts with High Diffusion-Induced Oxidation Activity

High-loading and Thermally Stable Pt1/MgAl1.2Fe0.8O4 Single-Atom Catalysts for High-Temperature Applications

Highly Active and Stable Palladium Catalysts on Novel Ceria–Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Thermal and hydrothermal stability of siliceous Y zeolite and its application to high-temperature catalytic combustion

Insights into the role of Pt on Pd catalyst stabilized by magnesia-alumina spinel on gama-alumina for lean methane combustion: Enhancement of hydrothermal stability

Thermal Facet Healing of Concave Octahedral Pt–Ni Nanoparticles Imaged in Situ at the Atomic Scale: Implications for the Rational Synthesis of Durable High-Performance ORR Electrocatalysts