Abstract:This study describes the effect of heat treatment on some physical, chemical, and mechanical properties of Eucalyptus Camaldulensis (EC) wood at different temperatures and treatment times (200 °C-260 °C for 5, 60, and 90 min). The evaluation of hygroscopic properties was determined by relative humidity, mass loss, dimensional stability tests, and density. The results showed that the heat treatment leads to an increase in mass loss of 5.2 %-11.9 % at 200 °C. The density changed significantly for this studied species as well as the dimensional stabilization. Chemical changes in wood structure were assessed by Fourier Transform Infrared Spectroscopy.To verify the validity of the superposition "Mass loss-Density-water absorption" on the mechanical properties (modulus of elasticity (MOE) and modulus of rupture (MOR)) during heat treatment, we have developed a mathematical model based on Multiple Linear Regression (MLR), in order to establish a relationship between the independent parameters and the dependent parameters (MOE and MOR). The evaluation of the quality of the models developed was based on several statistical tools, namely R = 0.99, R2 = 0.99, R2adj = 0.98, and F = 132.33. The results demonstrated that elaborate models of mechanical properties have a high predictive capacity (MOR and MOE). The wood's carbohydrates (particularly hemicelluloses) are then degraded during the heat treatment. The % of carbon increases from 47.8 to 49.8 %, which is proportional to mass loss, while the % of oxygen decreases by 46.1 %, which is inversely proportional to mass loss. Furthermore, FTIR analysis revealed that the effect of heat-treated wood chemical changes was related to the hydroxyl OH function of cellulose, functional groups, and aromatic system of lignin. In conclusion, the results demonstrated that at 200 °C, heat treatment caused a 5.2-11.9 % increase in mass loss; dimensional stability and density underwent considerable changes. FTIR spectroscopy confirmed the chemical changes in the wood structure during heat treatment. Furthermore, the "MLR" mathematical model showed that density contributed to the increase in MOR and MOE properties, while water absorption and mass loss contributed to the decrease in MOR and MOE properties. Finally, the % of oxygen decreased by 46.1 %, which is inversely proportional to the loss of mass, and the % of carbon increased from 47.8 % to 49.8 %, which is proportional to the loss of mass.

Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy

Rapid Determination of Componential Contents and Calorific Value of Selected Agricultural Biomass Feedstocks Using Spectroscopic Technology

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment

The relationship between color and mechanical properties of heat-treated wood predicted based on support vector machines model

Quantitative prediction of moisture content distribution in acetylated wood using near-infrared hyperspectral imaging

Effect of natural weathering on water absorption and pore size distribution in thermally modified wood determined by nuclear magnetic resonance

New Perspective on Wood Thermal Modification: Relevance between the Evolution of Chemical Structure and Physical-Mechanical Properties, and Online Analysis of Release of VOCs

Mass loss kinetics of thermally modified wood species as a time–temperature function

Rapid Lignin Thermal Property Prediction through Attenuated Total Reflectance‐Infrared Spectroscopy and Chemometrics

Color as an Indicator of Properties in Thermally Modified Scots Pine Sapwood

Investigations of the Chemical Distribution in Sorbitol and Citric Acid (SorCA) Treated Wood—Development of a Quality Control Method on the Basis of Electromagnetic Radiation

Study of the effect of heat temperature on the chemical changes and hygroscopicity of eucalyptus wood by FT-IR and prediction of mechanical properties by the MLR regression method

Characterization of water content and inspection of delamination in spruce, oak and meranti woods after pyrolysis processing using a new terahertz time-domain spectroscopy method

Quantitative Analysis of Biomass in Three Types of Wood-Plastic Composites by FTIR Spectroscopy

Rapid estimation of wood density and total extractives of two important Dalbergia species using near-infrared (NIR) spectroscopy and multivariate analysis

[The analysis of wood microfibril angle by near infrared spectroscopy and X-ray diffractometry].

Tapping the Full Potential of Infrared Spectroscopy for the Analysis of Technical Lignins

Structural Characterization of Steam-Heat Treated Tectona Grandis Wood Analyzed by FT-IR and 2D-IR Correlation Spectroscopy

Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression

Impact of thermal modification on color and chemical changes of African padauk, merbau, mahogany, and iroko wood species

Wood Properties Characterisation of Thermo-Hydro Mechanical Treated Plantation and Native Tasmanian Timber Species