Abstract:Abstract Fighter aircraft constitutes a well-defined class of aircraft. Their extensive use on a daily basis by operators stands as a strong motive behind studies that concern their rate of “exhaustion ”. For an aircraft operator either civil or military, it is very important at any point in time to have a clear view of the engines’ and the aircrafts’ operating condition. This is valuable information in order to foresee undesired incidences and in order to schedule missions in accordance to the actual and anticipated maintenance needs. For the latter, the operator would also need to know the rate of the engine and the aircraft life consumption per mission. The current study concerns the F-16 Block 52M aircraft, powered by the Pratt and Whitney F100-PW-229 engine. Aircraft is continuously subjected to crack growth mechanisms while flying. On the other hand, engines also go through Low Cycle Fatigue (LCF) cycles and creep prominent conditions while being in operation. The engine and the aircraft structural condition are continuously monitored, based on real time data recordings. To the extent of the authors’ knowledge, that is a common practice for most F-16 users. However, what was found to be missing from the international literature was a study to quantify any potential correlation between the aircraft loading and the engine loading for all typical mission types an aircraft of this type undertakes. For users that have already installed an aircraft loading monitoring system like “Aircraft Structural Integrity Program” (ASIP) it would be very useful to set a “rule of thumb” aside regarding the degree of correlation between aircraft and engine loading. Engine life consumption rate was estimated based on the creep and LCF failure mechanisms applied on the most critical engine section, the turbine. Engine recordings were picked from an arbitrary sample of 200 flights of a certain aircraft, wherein most typical mission types could be found. Turbine and subsequently blade temperature as well as blade stress were calculated using a very narrow time step. These data along with blade material data were fed in the Larson Miller model, to set an algorithm for estimating life consumption due to creep. Engine Total Accumulated Cycles (TACs) which account for LCF loading, are directly measured by the engine recorder, based on an embedded algorithm. Aircraft loading is calculated based on the accelerations the aircraft structures encounter during flight. These are also recorded under a very narrow time step. Last step was the correlation of the engine life consumption against the aircrafts’ loading for typical mission types. Scatter diagrams and statistical measures were used, in order to define the degree of correlation between them.

Turboprop Engine Loading During High and Low Maneuver Intensity Flight Mode

Correlation Between Engine and Aircraft Loadings for Several Mission Types

Energetic and exergetic metrics of a cargo aircraft turboprop propulsion system by using regression method for dynamic flight

Aircraft Gas Turbine Engine Health Monitoring System by Real Flight Data

Investigation of Performance Degradation in a Mixed Flow Low Bypass Turbofan Engine

Thermodynamic-based environmental and enviroeconomic assessments of a turboprop engine used for freight aircrafts under different flight phases

Integrated Hybrid Engine Cycle Design and Power Management Optimization

Reducing the effect of engine failure on the aerodynamic performance of the light transport aircraft model

An Engine Deterioration Model for Predicting Fuel Consumption Impact in a Regional Aircraft

Determination of Pm Mass Emissions from an Aircraft Turbine Engine Using Particle Effective Density

Civil aircraft engine operation life resilient monitoring via usage trajectory mapping on the reliability contour

0-D Dynamic Performance Simulation of Hydrogen-Fueled Turboshaft Engine

An Investigation Into Performance Modeling of a Small Gas Turbine Engine

Impact of Load Retention on Aircraft Engine Parts Under Real Flight Cycle Conditions in Service Life Monitoring

Life cycle assessment and exergoenvironmental analyses for making a decision in the fuel selection for aero-engines: An application for a medium-size turboprop engine (m-TPE)

Self-tuning Process of the Control Laws of the Aviation Gas Turbine Engine

Assessment of degradation equivalent operating time for aircraft gas turbine engines

Exergy analysis of a turboprop engine at different flight altitude and speeds using novel consideration

Thermodynamics, Environmental and Sustainability Impacts of a Turbofan Engine Under Different Design Conditions Considering Variable Needs in the Aviation Industry

Effect of engine failure on aerodynamic characteristics of a light transport aircraft model

Modeling of performance and thermodynamic metrics of a conceptual turboprop engine by comparing different machine learning approaches