Abstract:Abstract Fighter aircraft constitutes a well-defined class of aircraft. Their extensive use on a daily basis by operators stands as a strong motive behind studies that concern their rate of “exhaustion ”. For an aircraft operator either civil or military, it is very important at any point in time to have a clear view of the engines’ and the aircrafts’ operating condition. This is valuable information in order to foresee undesired incidences and in order to schedule missions in accordance to the actual and anticipated maintenance needs. For the latter, the operator would also need to know the rate of the engine and the aircraft life consumption per mission. The current study concerns the F-16 Block 52M aircraft, powered by the Pratt and Whitney F100-PW-229 engine. Aircraft is continuously subjected to crack growth mechanisms while flying. On the other hand, engines also go through Low Cycle Fatigue (LCF) cycles and creep prominent conditions while being in operation. The engine and the aircraft structural condition are continuously monitored, based on real time data recordings. To the extent of the authors’ knowledge, that is a common practice for most F-16 users. However, what was found to be missing from the international literature was a study to quantify any potential correlation between the aircraft loading and the engine loading for all typical mission types an aircraft of this type undertakes. For users that have already installed an aircraft loading monitoring system like “Aircraft Structural Integrity Program” (ASIP) it would be very useful to set a “rule of thumb” aside regarding the degree of correlation between aircraft and engine loading. Engine life consumption rate was estimated based on the creep and LCF failure mechanisms applied on the most critical engine section, the turbine. Engine recordings were picked from an arbitrary sample of 200 flights of a certain aircraft, wherein most typical mission types could be found. Turbine and subsequently blade temperature as well as blade stress were calculated using a very narrow time step. These data along with blade material data were fed in the Larson Miller model, to set an algorithm for estimating life consumption due to creep. Engine Total Accumulated Cycles (TACs) which account for LCF loading, are directly measured by the engine recorder, based on an embedded algorithm. Aircraft loading is calculated based on the accelerations the aircraft structures encounter during flight. These are also recorded under a very narrow time step. Last step was the correlation of the engine life consumption against the aircrafts’ loading for typical mission types. Scatter diagrams and statistical measures were used, in order to define the degree of correlation between them.

Civil aircraft engine operation life resilient monitoring via usage trajectory mapping on the reliability contour

CBM decision-making system based on real-time status monitoring for gas turbine

An integrated life-cycle maintenance modeling and simulation framework for aero engine fleet management decision support

Prognostics of Gas Turbine: A Condition-Based Maintenance Approach Based on Multi-Environmental Time Similarity

Data-driven maintenance priority recommendations for civil aircraft engine fleets using reliability-based bivariate cluster analysis

Predictive Maintenance Scheduling for Aircraft Engines Based On Remaining Useful Life Prediction

Explainable Data-Driven Method Combined with Bayesian Filtering for Remaining Useful Lifetime Prediction of Aircraft Engines Using NASA CMAPSS Datasets

Aircraft on-condition reliability assessment based on data-intensive analytics

Preventative Maintenance Decision System For Gas Turbine Based On Operation Status Information

Advancing aircraft engine RUL predictions: an interpretable integrated approach of feature engineering and aggregated feature importance

Aircraft Gas Turbine Engine Health Monitoring System by Real Flight Data

Impact of Load Retention on Aircraft Engine Parts Under Real Flight Cycle Conditions in Service Life Monitoring

In-service aircraft engines turbine blades life prediction based on multi-modal operation and maintenance data

Correlation Between Engine and Aircraft Loadings for Several Mission Types

Predictive Aircraft Engine Maintenance

Risk-based maintenance optimization of aircraft gas turbine engine component

An Integrated Monitoring, Diagnostics, and Prognostics System for Aero-Engines under Long-Term Performance Deterioration

Prediction of Failure Time and Remaining Useful Life in Aviation Systems: Predictors, models, and challenges

Fault prediction in aircraft engines using Self-Organizing Maps

Aero engine health monitoring, diagnostics and prognostics for condition-based maintenance: an overview

Life Prediction of Carrier-Based Aircraft Replaceable Units With Time-Varying Drift and Optimization Strategy for Imperfect Maintenance