Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

Design and characterization of a tuned vibration absorber for exhaust components.

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Design of tractor vibration testing system

Study on tuning methodologies of passive vibration absorbers

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

Study of Adaptive Tuned Vibration Absorber and Its Dynamic Properties

Design and validation of a nonlinear vibration absorber to attenuate torsional oscillations of propulsion systems

On the Design of Adaptive Active Resonant Vibration Absorber and its Vibration Damping Effect

Modelling and Tuning for a Time-Delayed Vibration Absorber with Friction

Development of a mechanical semi-active vibration absorber

Robustness of a Tuned Viscous Mass Damper (TVMD) Controlled System

An effective vibration reduction concept for automotive applications based on granular-filled cavities

Theoretical and Experimental Investigation of a Tunable Vibration Absorber with Liquid Elastic Chamber

Active-Adaptive Vibration Absorbers and its Vibration Attenuation Performance

Study on Mechanical Adaptive Tuned Vibration Absorber

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

A Pendulum-Like Tuned Vibration Absorber and Its Application to a Multi-Mode System

Parameter Optimization and Application for the Inerter-Based Tuned Type Dynamic Vibration Absorbers

The design of an active-adaptive tuned vibration absorber based on magnetorheological elastomer and its vibration attenuation performance

Research on Tuned Ferrofluid Dynamic Vibration Absorber Based on Throttle Valve Opening

Design optimization of multiple tunable vibra- tion absorber with liquid elastic chamber for suppressing multi-mode vibration