Abstract:Purpose – The purpose of this paper is to reduce the torque ripple but not to decrease the average torque of synchronous reluctance machines by using one step or more than two axially laminated rotors with asymmetric flux-barrier. Design/methodology/approach – A 24-slot four-pole synchronous reluctance machine with overlapping windings and asymmetric flux-barrier in the rotor is, first, described and designed by finite element (FE) method for maximizing average torque. The dimensions of asymmetric flux-barrier including the pole span angle and flux-barrier angle will be optimized to minimize the torque ripple and its influence on the average torque is also investigated by FE analysis. The impact of current angle on the average torque and torque ripple are also analysed. The step laminations together with the asymmetric flux-barrier are employed for further torque ripple reduction which can consider the both rotation directions. Findings – The torque ripple of synchronous reluctance machine can be significantly reduced by employing asymmetric flux-barrier but the average torque is not reduced. Research limitations/implications – The purely sinusoidal currents are applied in this analysis and the effects of harmonics in the current on torque ripple are not considered in this application. The 24-slot/four-pole synchronous reluctance machine with single-layer flux-barrier has been employed in this analysis, but this work can be continued to investigate the synchronous reluctance machine with multilayer flux-barrier. This asymmetric flux-barrier can be easily applied to permanent magnet (PM)-assisted synchronous reluctance machine and the interior PM machine with flux-barrier in the rotor, since the space which is used for PM insertion is the same as the SynRM machines. Originality/value – This paper has analysed the torque ripple and average torque of synchronous reluctance machines with asymmetric flux-barrier and step laminations with asymmetric flux-barrier. The torque ripple can be reduced by this flux-barrier arrangement. The difference of this technique with the other techniques such as stator/rotor skew is that the average torque can be improved.

Torque Ripple Reduction of BLDC Traction Motor of Electric Wheelchair for Ride Comfort Improvement

Reduction of Commutation Torque Ripple in Brushless DC Motors

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

A New Torque Control Method for Torque Ripple Minimization of BLDC Motors with Un-Ideal Back EMF

Model Predictive Control Method of Torque Ripple Reduction for BLDC Motor

Torque ripple suppression of brushless dc motors with non-ideal back EMF for EPS applications

Improved Finite Control-Set Model-Based Direct Power Control of BLDC Motor With Reduced Torque Ripple

A New Method of Torque Ripple Minimization for Brushless DC Motors

A Strategy of Torque Ripple Minimization for BLDC Motors with Nonideal Back EMF

Torque ripple reduction in brushless DC motor drives

Effective Torque Ripple Reduction of Permanent Magnet Brushless DC Motor

Torque ripple reduction of BLDC motor based on DC bus voltage automatic selection circuit and neutral point clamped three-level inverter control

Torque ripple analysis and reduction of permanent magnet synchronous motor

Research on Torque Ripple Minimization of Position-Sensorless Brushless DC Motor

Torque Ripple Reduction in Single Phase Brushless DC Motors of High Magnetic Load

Torque Ripple Reduction of Synchronous Reluctance Machines: Using Asymmetric Flux-Barrier

A Novel PWM Scheme to Eliminate the Diode Freewheeling in the Inactive Phase in BLDC Motor

A Practical Method to Eliminate the Conduction Torque Ripple in BLDCM Using Cascade Topology

Analysis and Optimization of Torque Ripple Reduction Strategy of Surface-Mounted Permanent-Magnet Motors in Flux-Weakening Region Based on Genetic Algorithm

Comprehensive Analysis of Wheel Drive Motor Torque Characteristics