Abstract:An incremental predictive control strategy based on unipolar pulse width modulation (PWM) is proposed in the non‐commutation interval to double the current ripple frequency, which can reduce the current ripple. On this basis, the prediction equations of adjacent control periods are subtracted to eliminate the influence of non‐ideal back‐electromotive force (back‐EMF) on the torque ripple suppression effect. Aiming at the torque ripple caused by significant current ripple and non‐ideal back‐electromotive force (back‐EMF) of coreless brushless DC motor (BLDCM), an incremental predictive control strategy based on unipolar pulse width modulation (PWM) is proposed in the non‐commutation interval. Firstly, the unipolar PWM scheme is used to double the current ripple frequency, which can reduce the current ripple. On this basis, the current prediction equations of adjacent control periods are subtracted to obtain the incremental current prediction equation, and the influence of non‐ideal back‐EMF on torque ripple suppression is eliminated. Finally, combined with the author's previous research on the commutation torque ripple suppression strategy, an integrated suppression strategy for non‐commutation and commutation interval is proposed. The experimental results show that, compared with the PI control strategy, the total torque ripple of the proposed strategy is reduced to less than 35%, and the current ripple is reduced. Meanwhile, the commutation time is shortened, and the advantages of coreless motor rapid response are retained. The strategy is universal, not limited by motor parameters and operating conditions, and has theoretical and engineering value.

Torque ripple suppression of brushless dc motors with non-ideal back EMF for EPS applications

Research on PWM Method in Brushless DC Motor

Reduction of Commutation Torque Ripple in Brushless DC Motors

Suppression of torque ripple due to phase commutation in brushless DC motor drives considering the stator resistance

Modeling and Simulation of Brushless Dc Motor Control System for EPS Applications

A New Torque Control Method for Torque Ripple Minimization of BLDC Motors with Un-Ideal Back EMF

Model Predictive Control Method of Torque Ripple Reduction for BLDC Motor

A Strategy of Torque Ripple Minimization for BLDC Motors with Nonideal Back EMF

A New Method of Torque Ripple Minimization for Brushless DC Motors

Torque Direct Control Method for BLDC Motors with Non-Ideal Back EMF Waveforms

A Novel Strategy to Suppress Commutation Torque Ripple in Brushless DC Motor Based on Unitive Formula

Improved Finite Control-Set Model-Based Direct Power Control of BLDC Motor With Reduced Torque Ripple

A Novel PWM Scheme to Eliminate the Diode Freewheeling in the Inactive Phase in BLDC Motor

Damping Control of EPS System with Permanent Magnet Synchronous Motor

Direct Torque Control for Brushless DC Motors in Aerospace Applications with Single Sided Matrix Converters with Reduced Torque Ripple

Suppression Technique for Torque Ripple of Brushless DC Motor Caused by PWM Mode Switching

Low Loss PWM Control Strategy for EPS System With BLDC Motors

Research on Torque Ripple Minimization of Position-Sensorless Brushless DC Motor

A Practical Method to Eliminate the Conduction Torque Ripple in BLDCM Using Cascade Topology

Torque ripple suppression in non‐commutation interval of the coreless brushless DC motor based on unipolar PWM predictive control

Research on Suppressing Commutation Torque Ripple of BLDCM Based on Zeta Converter