Abstract:Since the discovery of exceptional properties of graphene, a lot of researchers focused on the discovery of another nobel two-dimensional (2D) materials. Recently, an elegant exfoliation approaches was proposed as a method to synthesis a new family of transitional 2D metal carbide or nitrades of MXene from a layered MAX phase. A layered MAX phase of Ti3AlC2 was synthesized through pressureless sintering (PLS) the initial powder of 3TiH2/1.1Al/2C without preliminary dehydrogenation under argon atmosphere at 1350 oC. An elegant exfoliation approach was used to eliminates Al from its precursor to form a layered-structure of Ti3C2. In this study, thermal conductivity of MAX phase and MXene were studied using absolute axial heat flow method to measure the abilities sample to conduct heat and the data was collected using Picolog 1216 Data Logger. Electrical conductivity of these two materials was also compared by using two-point probe, due to its simplicity. Radiation properties of 2D MXene Ti3C2 was studied by using an established radon monitor, placed in closed, fabricated container. Morphological and structural properties of this 2D material were also studied using an established FESEM and XRD apparatus. SEM images shows two types of morphology which is a layer of Ti3C2 and the agglomerates Al2O3 with graphite. XRD pattern reveals three phases in this material which is a rhombohedral Al2O3, rhombohedral graphite and rhombohedral Ti3C2 phases, respectively. Thermal and electrical conductivity of MXene were proven higher than MAX phase. Radon concentration for this material for five consecutive days explains the radiation level of this material which is under the suggestion value from US Environmental Protection Agency (EPA). From this finding, it is can conveniently say that the MXene material can be promising material for electronic application.

Low-temperature annealing of 2D Ti3C2Tx MXene films using electron wind force in ambient conditions

Micro-Structure and Dielectric Properties of Ti3C2Tx MXene after Annealing Treatment under Inert Gases

Violation of the Wiedemann-Franz Law and Ultralow Thermal Conductivity of Ti 3 C 2 T x MXene

Room-temperature synthesis of 2D-Ti3C2Tx nano-sheets by organic base treatment

A Study of two Dimensional Metal Carbide MXene Ti3C2 Synthesis, characterization conductivity and radiation properties

A strategy for 2D MXenes as thermal management materials by laser shock nanoshaping

Synthesis, physico-chemical characterization, DFT simulation, and field electron behaviour of 2D layered Ti3C2Tx MXene nanosheets

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching

Oxygen functionalization-induced crossover in the tensile properties of the thinnest 2D Ti<sub>2</sub>C MXene

Multi-year Study of Environmental Stability of Ti$_3$C$_2$T$_x$ MXene Films

Violation of the Wiedemann-Franz law and ultra-low thermal conductivity of Ti$_3$C$_2$T$_x$ MXene

Annealing modification of MXene films with mechanically strong structures and high electrochemical performance for supercapacitor applications

Stabilizing Ti3C2Tx MXene flakes in air by removing confined water

Investigation of MXenes Oxidation Process during SPS Method Annealing

Fast and High-Yield Anhydrous Synthesis of Ti3 C2 Tx MXene with High Electrical Conductivity and Exceptional Mechanical Strength

Enhancing the Magnetism of 2D Carbide MXene Ti3C2Tx by H2 Annealing

Temperature Evolution of Composition, Thermal, Electrical and Magnetic Properties of Ti3C2Tx-MXene

Alkali cation stabilization of defects in 2D MXenes at ambient and elevated temperatures

2D Carbide MXene under Postetch Low-Temperature Annealing for High–performance Supercapacitor Electrode

Achieving High Electrical Conductivity, Energy Storage Capacity and Cycling Stability in Ammoniated Mo2TiC2Tx MXenes As Anode for Lithium-ion Battery

Measurement and Analysis of Thermal Conductivity of Ti3C2Tx MXene Films