Cutting performance of silicon-based ceramic end milling tools in high-efficiency machining of GH4099 under dry condition

Hewu Sun,Bin Zou,Wei Chen

DOI: https://doi.org/10.1007/s00170-021-08084-1

IF: 3.563

2021-09-22

The International Journal of Advanced Manufacturing Technology

Abstract:Ceramic materials have become one of the ideal materials for manufacturing cutting tools in the field of high-speed machining due to their excellent heat resistance, wear resistance, and high temperature strength. Aiming at the difficult-to-machine characteristics of nickel-based superalloy, such as high strength and toughness, low thermal conductivity, and strong viscosity, the cutting performance of four self-developed silicon ceramic end mills defining as S1, S2, S3, and S4 in machining of GH4099 was compared and studied in this work. The cutting force, tool life, cutting temperature, and machined surface roughness were deeply evaluated. The results indicate that the tool life of our developed ceramic tools was 14 times higher than commercial carbide tool at the cutting speed of 400 m/min, and furthermore, their maximum metal removal rate of the ceramic tool could reach 8.15 cm3/min. Besides, the average cutting efficiency of the ceramic tool can be 1.5 times higher than carbide tool in our investigation. It was worth noting that not only the cutting force of the ceramic tool was 13.5% lower but also the machined surface roughness was slightly lower than carbide tool. The wear mechanisms of the ceramic end mills were mainly adhesive wear and diffusion wear. In general, the four self-developed silicon ceramic end milling tools exhibited better cutting performance than carbide tool.