Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Biomass-Based Fuel Cell Power Plants: Evaluation of Novel Reactors and Process Designs

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

An Innovative Biomass-Driven Multi-Generation System Equipped with PEM Fuel Cells/vcl Cycle: Throughout Assessment and Optimal Design Via Particle Swarm Algorithm

Design and evaluation of a novel plan for thermochemical cycles and PEM fuel cells to produce hydrogen and power: Application of environmental perspective

Multi-aspect analysis and optimization of biomass-fueled multi-generation plant

A single-phase, non-isothermal model for PEM fuel cells

Prospects of Fuel Cell Combined Heat and Power Systems

Combined biomass gasification, SOFC, IC engine, and waste heat recovery system for power and heat generation: Energy, exergy, exergoeconomic, environmental (4E) evaluations

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

Performance, Efficiency, and Flexibility Analysis of a High-Temperature Proton Exchange Membrane Fuel Cell-Based Micro-Combined Heat-and-Power System with Intensification of the Steam Methane Reforming Step by Using a Millistructured Reactor

Multi-objective optimization of an innovative fuel cell and biomass power system for hydrogen synthesis and injection using thermochemical cycle

Technical design of an innovative biomass/gasification-driven power plant with heat recovery hybrid system: CO2 emission comparison between the designed plant and fossil fuel-powered plants

Retrofitting Biomass Combined Heat and Power Plant for Biofuel Production—A Detailed Techno-Economic Analysis

Environmental and exergoeconomic analysis of a low-carbon polygeneration process based on biomass energy, a geothermal source and a high-temperature fuel cell

Energetic and exergetic analysis of a biomass-fueled CCHP system integrated with proton exchange membrane fuel cell

A novel hybrid process with a sustainable auxiliary approach concerning a biomass-fed solid oxide fuel cell and triple-flash geothermal cycle

Process Intensification and Fuel Cells Using a Multi-Source Multi-Product Approach

Thermo-economic analysis and multi-criteria optimization of an integrated biomass-to-energy power plant

A Dynamic Analysis of Biomethane Reforming for a Solid Oxide Fuel Cell Operating in a Power-to-Heat System Integrated into a Renewable Energy Community

Thermodynamic analysis of a novel hybrid fuel cell-combined cooling, heating-and power (CCHP) system-integrated solar-driven biomass gasification for achieving sustainable and efficient poly-generation

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol